1610-1 (700C) Milwaukee Electric Drill - Overview

Genuine Milwaukee replacement part, this item is sold individually. This Chuck Key tightens the jaws of the 1/2 inch capacity Chucks on all the Drill models shown below. For convenience a Chuck Key Holder part number 48-66-4040 can be ordered. It is attached to the power cord then the Chuck Key is attached to it.

This genuine carbon brush assembly maintains electrical contact between the fixed motor wiring and the rotating armature in compatible power tools, it includes one carbon brush with an attached wire lead, spring, and bracket, a worn brush can cause intermittent operation, reduced power, or weak electric braking, inspect the armature for damage and confirm the tool model before ordering

This is a genuine Milwaukee replacement part, it is sold individually. The purpose of the 06-75-3150 Screw is to secure the chuck to the spindle of the models listed below. This is a left hand threaded screw, to remove it turn it clockwise. We do have an article and video on

It is a high quality switch is a genuine Milwaukee replacement part that is specially designed for electric drill drivers. Switches are a commonly replaced part that handles on/off operations, because switches use mechanical internals over time they will begin to break down eventually requiring replacement. One plastic switch is included per order, to complete this repair you will need a screwdriver.

Included in part number 14-13-0465

This replacement brush tube is an specially manufactured for use with a variety of Milwaukee power tools. It is a genuine OEM part, not an aftermarket equivalent. This part is used to secure the carbon brush that is sold separately. It is made out of metal and it is sold individually. To complete this repair you will need a screwdriver ...Read moreand pliers. • First make sure the tool is unplugged • Remove the housing • Remove the carbon brush • Disconnect the wires • Remove the old tube • Install the new brush holder • Reassemble and test your tool

This is a genuine Milwaukee replacement part, it is sold individually. This Brush Retaining Screw (Brush Cap) is used on the model numbers shown below. The purpose of this part is to secure the brushes in the brush holder To remove this part ,simply use a flat head screw driver. Don't use too much pressure on it, they do have a tendency to break.

This Woodruff key is supplied directly from the original equipment manufacturer. The metal item is made for use with many power tools. This item is often fitted into the main assembly's split coupler. The key is designed to secure gears and shafts to engine components. Please be sure to refer to the specific manual and diagrams for repair...Read more instructions. This part is sold individually. A wrench, hex key and a screwdriver may be helpful in making the replacement.

This keyed chuck has a 1/2 inch capacity with a 5/8 inch - 16 thread. Use with chuck key 48-66-3280 and key holder 48-66-4040. The metal construction provides heavy-duty durability while the keyed design ensures the bit retention needed for high-torque applications. It can be used on reversing drills of matching capacities and threaded sp...Read moreindles. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem.

This is an authentic OEM part from the Milwaukee manufacturer. The spade handle is constructed of durable plastic, and is compatible with many drill/driver devices. This part is secured onto the motor housing, giving the user a grip for the apparatus. This part is sold individually. A screwdriver is needed in the repair.