145SV ((96141013108)(2013-02)) Husqvarna Lawn Tractor - Overview

This is a genuine Husqvarna replacement part, sold individually. Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower. A wrench is required for replacement of this part. This part is compatible with the Husqvarna lawn mower models that are listed below.

The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axl...Read moree. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers to install. If broken, damaged or worn, there may be a problem with the part it is securing and the part should be replaced. Refer to your make, model and diagrams to check if this is the right part.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This authentic item is supplied by the original equipment manufacturer for use with Husqvarna walk-behind lawn mowers. It provides an identical replacement for a missing or a faulty wheel and tire assembly that was installed on a new unit. Please make sure to check the owners manual and the appropriate diagrams of your model for the corre...Read morect location and application of this component. Keep in mind this high-quality assembly is made of durable plastic and is sold individually. Note, the hardware to secure it is sold separately.

It is an authentic OEM sourced replacement part that is specially designed for use with lawn mowers. This is a standard hardware which has multiple applications depending on the model of your unit, please refer to appropriate diagrams for correct application. This screw is made high-quality metal and it is sold individually.

The black star knob handle is available as an individual replacement part. If it breaks it will need to be replaced and no tools should be needed to replace this part. It is made of plastic and connects the upper handle to the lower handle. This genuine item is supplied by the original equipment manufacturer for use with Husqvarna, Poulan, and Jonsered lawn mowers.

This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on your unit. Please refer to diagrams for proper application.

A genuine item which is supplied directly from the original equipment manufacturer for use with Poulan, Husqvarna and Weed Eater lawn and garden equipment. It is one of the special screws for the skirt, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mi...Read morend this high-quality component is made of durable metal and is sold individually.

This is an authentic replacement part manufactured for use with walk-behind lawnmowers. The hex head screw is used with several different models of lawnmowers and is commonly used to secure a guard to the deck assembly. This hex head screw is available as an individual replacement part, please see model diagram for associative parts.

This 5/16 Lock Nut can be installed using a wrench or socket. It's used to secure parts in place. If the part being secured seems loose, check for damage and replace if necessary. Refer to your make, model, andd diagrams to ensure this is the correct part for you.