EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

1446 - Overview

Models starting with 1446

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Handle End Cap – Part Number: WB7X7183
No Longer Available
Door Handle End Cap
★★★★★
★★★★★
(43)
Part #WB7X7183
This oven door handle end cap is used on both the left and right hand sides. Sold individually.
Dryer Screw – Part Number: WP90767
$7.47
In Stock
Dryer Screw
★★★★★
★★★★★
(2)
Part #WP90767
This screw is sold individually.
Lid Switch – Part Number: W10820036
$22.52
In Stock
Lid Switch
★★★★★
★★★★★
(17)
Part #W10820036
This washer/dryer lid or door switch kit serves as a critical safety component, designed to prevent the appliance from operating when the lid or door is open. It ensures that the washer does not fill or spin and the dryer does not start unless the door is securely closed, helping to avoid water spills and potential safety hazards. The kit includes all necessary components for installation and is compatible with a wide range of top-loading washers and front-loading dryers. Installation typically involves disconnecting power, accessing the control panel or door area, and replacing the switch using standard tools. The switch is compact and designed to fit seamlessly within the appliance’s housing, with dimensions approximately 2.5 inches in length, 1 inch in width, and 1 inch in height. It features a neutral color finish that blends with most appliance interiors.
Door Handle End Cap – Part Number: WB7X7189
$38.36
In Stock
Door Handle End Cap
★★★★★
★★★★★
(6)
Part #WB7X7189
This end cap can be used for either the left or right side.
Burner Bowl - 8 Inch – Part Number: WB31T10013
$37.91
In Stock
Burner Bowl - 8 Inch
★★★★★
★★★★★
(6)
Part #WB31T10013
This burner bowl or drip pan is found beneath the heating element on your cooktop or range. This part measures 8 inches in diameter, and should not be confused with the smaller pan, which measures 6 inches in diameter. The burner bowl collects spills that may build up when cooking on your range. If your old 8-inch burner bowl is cracked, broken, or missing, this is the part that can replace it.
Drip Bowl - 6 Inch – Part Number: WB31T10012
$38.96
In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(2)
Part #WB31T10012
This gray drip bowl is sold individually.
Door Handle – Part Number: WB15K5076
$59.18
In Stock
Door Handle
★★★★★
★★★★★
(4)
Part #WB15K5076
This replacement door handle is designed to fit select range models and provides a secure grip for opening and closing the oven door. Measuring approximately 22 inches by 1 inch, it is constructed from durable black plastic for long-lasting performance. If your current handle is broken or missing, this genuine OEM part offers a reliable solution. Depending on your model, installation may require removing the inner panel of the oven door. Always refer to your owner's manual and wear work gloves for safety during installation.
Ceramic Fuse - 20 amp – Part Number: WPM0805101
$5.45
In Stock
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(3)
Part #WPM0805101
This microwave fuse is just over an inch in length. It has a white ceramic center, and metal on either end. This is a twenty amp 250-volt fuse, and is used to power your microwave. If your microwave will not heat properly, will not turn on, or the touch pad becomes unresponsive, there could be a faulty fuse which should be replaced. Remember, since this part contains an electrical charge, before you replace the fuse from your microwave, make sure that the power is disconnected from the unit. This part is sold individually. NOTE: Make sure your microwave is unplugged, and your capacitor is discharged before you begin this repair. A capacitor stores large amounts of electricity even after your microwave is unplugged.
Heat Resistant Adhesive – Part Number: W10841140
$18.22
In Stock
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
Part #W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.
Bottom Trim - White – Part Number: WB07K10250
$31.86
In Stock
Bottom Trim - White
★★★★★
★★★★★
(14)
Part #WB07K10250
Screws not included.
Terminal Block Kit – Part Number: WB17T10011
$64.77
In Stock
Terminal Block Kit
★★★★★
★★★★★
(13)
Part #WB17T10011
This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
Range Hex Nut – Part Number: WP488130
$8.55
Special Order
Range Hex Nut
★★★★★
★★★★★
(2)
Part #WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to wear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.

Exact Part matches for your search term

Hex Head Cap Screw 5/16-18 x 2 1/2 – Part Number: 1446
No Longer Available
Hex Head Cap Screw 5/16-18 x 2 1/2
This part number matches the current model number 1446
Part #1446
BP5078CNC-HMB-8 RELIEF VALVE – Part Number: 1446
$2447.55
Special Order
BP5078CNC-HMB-8 RELIEF VALVE
This part number matches the current model number 1446
Part #1446

Common Symptoms of models starting with 1446

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
terminal block melted
56 of 77 people found this instruction helpful.
  • jonathan from willow springs, IL
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. U nscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Was this helpful?
Thank you for voting!
The end caps broke on my oven door handle.
45 of 46 people found this instruction helpful.
  • Harry from Thomasville, GA
  • Easy
  • 15 - 30 mins
  • Screw drivers
1st I opened the oven door and removed the 2 screws that hold the outside and inside of the door together. With the door separated I removed the 2 screws that hold the end caps in place, then removed the old end caps. I put the new end caps on the oven door handle, aligned the holes for the end cap screws and reinstalled the screws,then reinstalled the oven door screws,closed the oven door and started cooking.
Was this helpful?
Thank you for voting!
Lid closes, switch wouldn't turn on machine.
31 of 47 people found this instruction helpful.
  • Kenneth from Wilmington, IL
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers, Socket set
Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. Time on my job doesn't, just that their service and expertise that is available to everyone is there to use. Broken bones or not, I will always get my parts and advice from PartSelect. Thanks to PartSelect.
Was this helpful?
Thank you for voting!