143716 Craftsman Engine - Overview

The fuel tank goes between the fuel tank bracket and the fuel line. This is a Tecumseh, Husqvarna, and Toro replacement part directly sourced from the manufacturer for use in engines and snowthrowers. This part holds the fuel and is priced individually. A wrench might be required during the replacement of this part. It will need to be replaced if it leaks.

The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This is a genuine replacement part that has been sourced from the original manufacturer to be used with snow thrower engines from Husqvarna and Toro. The metal screw is used to fasten the fuel tank to the tank mounting bracket. This item is available as an individual replacement part, please note a hex socket wrench may be needed to install this item.

It is a genuine replacement screw which is supplied by the original equipment manufacturer for use with lawn and garden equipment. This screw is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for the correct location and use of this item. Over time th...Read moree threads may wear out eventually requiring a replacement to ensure the proper fit. It is a high-quality component which is made of durable metal and it is sold individually, you will need a wrench to secure or remove it.

This OEM valve cover gasket, also known as the breather gasket, creates a seal between the breather body and cylinder block in your lawn equipment. Made of flexible plastic, it measures 2 inches by 4 inches. Oil stains or leaks around the valve cover indicate a problem with the gasket. You may also notice a burning smell or ticking noise ...Read morefrom the engine. If the gasket is not replaced, it can lead to severe engine damage and even engine failure. When replacing the gasket, start by turning off your machine and disconnecting the spark plug. Depending on your equipment model and make, you may need to remove components like the air filter or spark plug wires to access the valve cover. Refer to your user manual for guidance. Once you have access to the valve cover, use a wrench or socket to unthread the securing bolts or screws. Then, carefully peel off the old gasket. Please keep in mind that this replacement part is sold individually.

This primer line hose, which measures 18-3/4 inches long is a crucial component in your outdoor power equipment. It delivers fuel from the primer bulb to the carburetor, providing the initial fuel boost to start the engine. If you notice fuel leaks, cracks, or visible wear on the hose, it means that it is broken. Additionally, a spongy pr...Read moreimer bulb or the failure to deliver fuel to the carburetor when pressed are signs of a malfunctioning primer line hose. When this happens, your machine will be difficult or impossible to start. To remove the hose from your machine, disconnect it from both the carburetor and the primer bulb with pliers or a screwdriver. Please note that this replacement part is sold individually as an authentic OEM component.

It is a genuine gasket that is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. This special gasket is utilized to provide an air-tight seal for the muffler, please make sure to check appropriate diagrams of your model for the correct location and application of this hardware. Over time th...Read moree material may wear out and begin to crack eventually requiring a replacement to ensure the proper seal. It is a high-quality component which is made of durable composite material, please note it is sold individually.