143636052 Craftsman Engine - Overview

The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This paper air cleaner element, also known as an air filter, is sourced from the original manufacturer for use in outdoor power equipment. It has an outer diameter of 4.25 inches and a height of 3 inches. The air filter is responsible for removing dirt and debris from the air before it enters the engine to keep the engine free from contam...Read moreinants. Over time, it is normal for the paper on the filter to tear or become clogged, thereby restricting airflow, increasing fuel consumption, and damaging the engine. Regularly inspecting and replacing the air filter is critical to maintaining the performance of your engine. To begin this repair, locate the air filter housing near the engine or carburetor and remove the cover. Carefully remove and discard the old filter, making note of its position. Clean the air filter housing and insert a new, clean filter in the correct position. Place the cover back onto the housing and ensure that it is tightly fitted to prevent air leaks.

This breather element is also called an air filter cartridge, cleaner element, or engine filter. It prevents debris from reaching the carburetor of your lawn equipment while allowing clean air to enter. This clean air-fuel mixture is essential for energy production. A broken or clogged breather element can lead to fuel flow issues, errati...Read morec operation, or starting difficulties. Neglecting to replace a damaged breather element can result in engine problems such as poor fuel combustion, reduced power, or engine stalling. To access the breather element, locate its housing on your machine using your instruction manual. Remove any necessary clips or screws with pliers or a screwdriver. You may also need to put oil on this breather element while installing it into your machine, according to instructions given by its manufacturer. This OEM-verified component is sold individually.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. It is an identical replacement for a missing or a damaged screw that was installed on a new unit. This is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagra...Read morems of your model for the correct location and application of this part. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in Toro snowthrowers, lawn mowers, and tillers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the...Read more parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This is a genuine Toro replacement part for various yard equipment. The fuel cap is designed to affix on the gas tank and prevent gas from spilling out. This part is made of high-quality plastic designed to resist the corrosive property of gasoline. This item is sold individually.

This is a genuine Tecumseh part for use with Lawn and Garden Equipment Engines. The fuel line supplies gas from the tank to the carburetor. The most common reason for replacing the fuel line is when the engine is leaking fuel. This part is sold individually. The tools that you will need to replace the fuel line is a 5/16 inch socket or nut driver and pliers.