143246 Craftsman Engine - Overview

The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This item is available as an individual replacement part. The gasket attaches to the intake pipe and is made out of a thin material. During replacement, it may require a screwdriver to help install this part correctly. It will require replacing if it breaks. This genuine item is supplied by the original equipment manufacturer for use with...Read more lawn mowers, lawn tractors, and snowblowers made by Tecumseh, Toro, and Lawn Boy.

This OEM valve cover gasket, also known as the breather gasket, creates a seal between the breather body and cylinder block in your lawn equipment. Made of flexible plastic, it measures 2 inches by 4 inches. Oil stains or leaks around the valve cover indicate a problem with the gasket. You may also notice a burning smell or ticking noise ...Read morefrom the engine. If the gasket is not replaced, it can lead to severe engine damage and even engine failure. When replacing the gasket, start by turning off your machine and disconnecting the spark plug. Depending on your equipment model and make, you may need to remove components like the air filter or spark plug wires to access the valve cover. Refer to your user manual for guidance. Once you have access to the valve cover, use a wrench or socket to unthread the securing bolts or screws. Then, carefully peel off the old gasket. Please keep in mind that this replacement part is sold individually.

This paper air cleaner element, also known as an air filter, is sourced from the original manufacturer for use in outdoor power equipment. It has an outer diameter of 4.25 inches and a height of 3 inches. The air filter is responsible for removing dirt and debris from the air before it enters the engine to keep the engine free from contam...Read moreinants. Over time, it is normal for the paper on the filter to tear or become clogged, thereby restricting airflow, increasing fuel consumption, and damaging the engine. Regularly inspecting and replacing the air filter is critical to maintaining the performance of your engine. To begin this repair, locate the air filter housing near the engine or carburetor and remove the cover. Carefully remove and discard the old filter, making note of its position. Clean the air filter housing and insert a new, clean filter in the correct position. Place the cover back onto the housing and ensure that it is tightly fitted to prevent air leaks.

It is a genuine gasket that is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. This special gasket is utilized to provide an air-tight seal for the muffler, please make sure to check appropriate diagrams of your model for the correct location and application of this hardware. Over time th...Read moree material may wear out and begin to crack eventually requiring a replacement to ensure the proper seal. It is a high-quality component which is made of durable composite material, please note it is sold individually.

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman and Tecumseh pressure washers, lawn mowers, and snow blowers. When pulled, the starter rope engages starter spring causing the engine turn fast enough for the ignition module to generate a spark to ignite the fuel in the cylinder. Th...Read moreis part is made of nylon rope and is sold individually. To install the rope you will need a screwdriver and socket wrench. Turn the starter spring to build tension and recoil the rope inside.