EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

143016 Craftsman Engine - Overview

Models starting with 143016

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw – Part Number: 650926
$6.40
In Stock
Screw
Part #650926
This is an authentic OEM sourced replacement part, it is specially made for use with lawn and garden equipment. It is a standard hardware which has multiple applications depending on your model, please refer to appropriate diagrams for correct location and use of this item. Please note this high-quality hex head screw is sold individually.
Primer Bulb And Retainer Ring – Part Number: 640259
$13.21
In Stock
Primer Bulb And Retainer Ring
Part #640259
This is a genuine OEM approved replacement part designed for use with Toro lawnmowers with Tecumseh engines. By pressing on the purge bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. At some time the primer will lose its elasticity or crack and need to be replaced. It is made out of rubber and it is sold individually.
Spark Plug – Part Number: 35395
$6.40
Special Order
Spark Plug
Part #35395
This is an OEM sourced replacement part used with a variety of lawn and garden equipment. A spark plug delivers electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You should gap your spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a socket wrench to install the spark plug.
Gasket – Part Number: 26756
$5.28
In Stock
Gasket
Part #26756
This item is available as an individual replacement part. The gasket attaches to the intake pipe and is made out of a thin material. During replacement, it may require a screwdriver to help install this part correctly. It will require replacing if it breaks. This genuine item is supplied by the original equipment manufacturer for use with lawn mowers, lawn tractors, and snowblowers made by Tecumseh, Toro, and Lawn Boy.
Gasket-pipe, Intake – Part Number: 36786
$6.40
In Stock
Gasket-pipe, Intake
Part #36786
This replacement intake gasket is an authentic OEM sourced part that is specially produced for use with Tecumseh engines commonly installed on Toro lawn and garden equipment. Its purpose is to create an air tight seal for the carburetor air intake pipe. Over time gaskets will deteriorate and may crack eventually requiring a replacement. It is made from high quality composite material and it is sold individually.
Screw (1/4-15x7/8) – Part Number: 650665
$6.40
Special Order
Screw (1/4-15x7/8)
Part #650665
This is a genuine replacement part that has been sourced from the original manufacturer to be used with snow thrower engines from Husqvarna and Toro. The metal screw is used to fasten the fuel tank to the tank mounting bracket. This item is available as an individual replacement part, please note a hex socket wrench may be needed to install this item.
Starter Asm-rewind – Part Number: 590739
$59.35
Special Order
Starter Asm-rewind
Part #590739
Cap-Fuel (Black) (1-1/2 I D) – Part Number: 37844
$6.55
Special Order
Cap-Fuel (Black) (1-1/2 I D)
Part #37844
This black OEM fuel cap (1-1/2 ID) is a black plastic cap which attaches to the fuel tank to keep fuel in and keep debris out. If the cap becomes broken due to wear/damage/fatigue there may be a fuel leak, and the part should be replaced. Refer to your make, model and diagrams to ensure this cap is right for you.
Fuel Tank – Part Number: 36863
$47.50
Special Order
Fuel Tank
Part #36863
Lawn Mower Oil Fill Tube – Part Number: 35647A
$15.66
In Stock
Lawn Mower Oil Fill Tube
Part #35647A
This is an authentic manufacturer soured replacement oil fill tube which is specially designed for use with Briggs and Stratton and Tecumseh engines commonly installed on lawn and garden equipment. This item helps you to check the oil level using the dipstick which is sold separately. This part is made from durable plastic and it is sold individually. To replace this oil fill tube you will need a screwdriver to help with the screw that secures this part.
Resistor Plug – Part Number: 77-305-1
$6.40
In Stock
Resistor Plug
Part #77-305-1
This plug is an OEM direct from Craftsman for lawn mowers, tillers, lawn tractors, and chippers/shredders. This plug produces the flare that starts up the fuel in the engine. You will need a deep socket and a wrench to replace this part. This plug is made of plastic and metal. This part is sold individually.
Oil Drain Plug – Part Number: 36083
$8.25
In Stock
Oil Drain Plug
Part #36083
It is an authentic item which is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. This is an identical replacement for a missing or faulty oil drain plug that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable plastic and is sold individually.

Exact Part matches for your search term

KNOB, FABRIC SELECTOR – Part Number: 382823
No Longer Available
KNOB, FABRIC SELECTOR
This part number matches the current model number 143016
Part #382823
PANEL – Part Number: 00368768
No Longer Available
PANEL
This part number matches the current model number 143016
Part #00368768
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bad Camshaft made of plastic
5 of 9 people found this instruction helpful.
  • Dan from Millstone Twp, NJ
  • Really Easy
  • 30 - 60 mins
Ordered a replacement camshaft and had a terrible result. Supposed to be in stock but wasn't. NO update on when the part would arrive. NO contact unless I initiated it. Only email I received stated NO information on when part would arrive. I asked for Customer service to reach out for more details and they balked, did not want to do a nything. I insisted and the result was an email stating no idea. No further info from anyone. I figured my next step was to ask for a refund but figured it would not be refunded. I then found a "dead" engine and used THAT camshaft for my repair. Weeks later your part arrived with ZERO notice. I should have asked for a refund due to your failure to live up to your hype. ZERO stars for this junk. Will NOT ever use you again.
Was this helpful?
Thank you for voting!
Bad Camshaft made of plastic
2 of 2 people found this instruction helpful.
  • Dan from MILLSTONE TWP, NJ
  • Very Difficult
  • More than 2 hours
Original engine had camshaft made of plastic. Engine had a seal leak on shaft lost oil . Result was seized bearing and stripped camshaft. Ordered a replacement camshaft and gasket. Gasket came in a week after original due date and camshaft is NOT AVAILABLE. Didn't know that at original order. Followed up twice with operator, not ema il and got a non-answer answer. No idea when part will be available and requested a second contact and update. Same no idea reply. Result is a waste of my time with this company, will NOT use them again.
Was this helpful?
Thank you for voting!
Leaking gasoline from carburetor bowl. No air filter
1 of 2 people found this instruction helpful.
  • Richard from Geneva, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench set
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After abo ut 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Was this helpful?
Thank you for voting!