My Orders
143003501 Craftsman Engine - Overview
Diagrams for 143003501
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.40
In Stock
Screw
Part #650926
This is an authentic OEM sourced replacement part, it is specially made for use with lawn and garden equipment. It is a standard hardware which has multiple applications depending on your model, please refer to appropriate diagrams for correct location and use of this item. Please note this high-quality hex head screw is sold individually.
$48.39
On Order
Fuel Tank
Part #35591A
This genuine OEM sourced replacement fuel tank is a high-quality item that is specially designed for use with Husqvarna handheld lawn and garden equipment. Its purpose is to hold the fuel that is needed for the engine. Over time the tank may get damaged or lost eventually requiring a replacement. It includes the fuel tank, the cap, the fu...Read moreel lines and the clamps to secure them. Make sure to drain the gas tank before starting the repair.
Read less
$5.28
In Stock
Gasket
Part #26756
This item is available as an individual replacement part. The gasket attaches to the intake pipe and is made out of a thin material. During replacement, it may require a screwdriver to help install this part correctly. It will require replacing if it breaks. This genuine item is supplied by the original equipment manufacturer for use with...Read more lawn mowers, lawn tractors, and snowblowers made by Tecumseh, Toro, and Lawn Boy.
Read less
$6.40
Special Order
Screw (1/4-15x7/8)
Part #650665
This is a genuine replacement part that has been sourced from the original manufacturer to be used with snow thrower engines from Husqvarna and Toro. The metal screw is used to fasten the fuel tank to the tank mounting bracket. This item is available as an individual replacement part, please note a hex socket wrench may be needed to install this item.
$6.55
Special Order
Cap-Fuel (Black) (1-1/2 I D)
Part #37844
This black OEM fuel cap (1-1/2 ID) is a black plastic cap which attaches to the fuel tank to keep fuel in and keep debris out. If the cap becomes broken due to wear/damage/fatigue there may be a fuel leak, and the part should be replaced. Refer to your make, model and diagrams to ensure this cap is right for you.
$53.05
Special Order
Control Assembly
Part #36677
This is an OEM part sourced directly from the manufacturer. The control assembly is found in Toro snow throwers and tillers and in Husqvarna engines. This part includes three metal brackets, a plastic control knob, and hardware for attachment. It is generally connected to the blower housing baffle. You may require a screwdriver and wrench when replacing these parts.
$6.40
In Stock
Screw, 10-32x49/64"
Part #650932
This part is an OEM from Husqvarna. The screw (10-32x49/64 & #34) is made for use with many lawn mower engines, and is sold individually. The metal screw is often used to secure the engine air cleaner collar. A screwdriver and pliers are helpful with making the replacement.
$46.34
Special Order
$6.40
On Order
Flywheel Nut
Part #650816
This is a genuine replacement part sourced from the original manufacturer for use with small engines. The metal hex nut is used to fasten the engine's flywheel to the crankshaft assembly. This item is available as an individual replacement part, please see diagram for related items.
$10.83
In Stock
Rope-starter (98 Cut To Length
Part #590535
This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman and Tecumseh pressure washers, lawn mowers, and snow blowers. When pulled, the starter rope engages starter spring causing the engine turn fast enough for the ignition module to generate a spark to ignite the fuel in the cylinder. Th...Read moreis part is made of nylon rope and is sold individually. To install the rope you will need a screwdriver and socket wrench. Turn the starter spring to build tension and recoil the rope inside.
Read less
$8.39
In Stock
Spark Plug
Part #33636
This is a genuine OEM sourced part which is specially made for use with a variety of lawn and garden equipment. A spark plug delivers electric current from the ignition system to the internal combustion engine. Unfortunately, over time spark plugs will become dirty or fouled eventually requiring a replacement to maintain peak performance....Read more Note, you should gap your spark plug according to the owners manual of the outdoor product you have. Keep in mind this high-quality spark plug is made of durable materials and is sold individually.
Read less
$4.23
Special Order
O-ring
Part #632547
This O-ring is designed for use with small engine carburetors and is made of rubber, meaning over time and further exposure to fuel, it will become brittle and crack. This O-ring is installed within the carburetor and is located between securing screws near the base. If disassembling your equipment to replace this O-ring, it is recommende...Read mored you inspect the other parts to ensure optimal performance and to prevent any leaks. Featuring an inner-diameter of approximately 0.25-inches, the replacement process for this O-ring in your engine will vary, so check the user manual for exact location of this part.
Read less
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Leaking gasoline from carburetor bowl. No air filter
1 of 2 people
found this instruction helpful.
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After abo
... Read more
ut 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Read less
Other Parts Used:
![Screw, 10-32x49/64" – Part Number: 650932](/9293091-1-S-Tecumseh-650932-Screw-10-32x49-64-amp-34.jpg "Screw, 10-32x49/64" – Part Number: 650932")
Was this helpful?
Thank you for voting!