12AE467E030 (2007) Husky Lawn Mower - Overview

The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation requires a hammer, 5/8 socket and torque wrench, and is rated as "Easy" by our customers. If broken or damaged (likely due to fatigue) you m...Read moreay hear a rattling sound coming from it, and the part should be replaced. This part is dark gray/silver, individually sold, and measures approx 3.5 x 1.25 inches. Refer to your make, model and diagrams to check if this is the correct part for you.

This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inches in length. Over time, the hinge pin may break, and it will no longer be able to support the chute or allow it to move. If this occurs, ...Read moreyou will need a pair of needle nose pliers to complete this simple repair, which most of our customers told us was easy. Look for the hinge pin on the chute door and the mounting bracket of your mower deck.

This is an authentic OEM supplied replacement part that is specially designed for use with walk-behind lawn mowers. In conjunction with a bolt which is sold separately, this part is generally used to secure the front baffle to the mower deck. This part is made from durable black plastic and it is sold individually. Securing and removing this part is extremely easy without the need for any tools.

This is a genuine replacement part that has been sourced from the original manufacturer to be used with lawnmowers from MTD, Ryobi, and Troy-Bilt. The metal wave washer is used to provide cushioning between part assemblies along a shaft. It is recommended to review your model\\\'s diagram to verify the washers compatibility. This item is sold as an individual replacement part.

This is a genuine replacement part sourced from the original manufacturer for use with walk-behind lawnmowers. The front baffle is commonly used to protect the leading edge of the mower\\\'s deck. This front baffle is available as an individual replacement part, please see model diagram for associative parts.