12516824 Craftsman Utility Vacuum - Overview
Sections of the 12516824
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Filter
PartSelect #: PS9909093
Manufacturer #: 17816
This is a Craftsman brand filter. It is a direct replacement for the filter that came originally with the vacuum. The purpose of the filter is to keep dust and debris from clogging the vacuum. It work...
No Longer Available
Wand extension
PartSelect #: PS9909207
Manufacturer #: 17854
This is an authentic OEM sourced component which is specially made for use with Craftsman wet/dry vacuums. It is an identical replacement for a missing or a faulty wand extension that was included wit...
No Longer Available
Cage
PartSelect #: PS11998975
Manufacturer #: VJ51PF.10.04.W2.00
This cage is an OEM from Craftsman for wet and dry vacuums. This part locks and holds the vacuum filter in place. It is recommended to review your models diagram to verify the parts compatibility. Th...
No Longer Available
Shop vacuum caster and foot
PartSelect #: PS12489910
Manufacturer #: TVQTJC.29.00
No Longer Available
Questions And Answers for 12516824
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The hose was broken - separated from the connector
I was disappointed to find the hose kit to not be correct, since the information on the site said it would work for my model. After trying various combinations of ends I decided to modify my existing connector. It had a ridge that would not let the hose coupler go on. I was able to grind that ridge off. I then fitted the connector over th
... Read more
e end, after putting waterproof adhesive on the end. I let that set up for 4 hours, then inserted the hose inside the other end. So far it is holding.
Read less
Parts Used:
-
Gary from WILLMAR, MN
-
Difficulty Level:Very Difficult
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!