12227 Troy-Bilt Tiller - Overview

The Forward Drive Belt is a 12.5-inch black, rubber belt, sold individually. Installation of this manufacturer-certified part is rated as "Easy" by customers and will require pliers, a socket set, and a wrench set. This part is used to transfer power from the engine's drive pulley to the transmission. If broken due to wear/fatigue/damage,...Read more the drive wheels will no longer be able to propel the mower, and the part should be replaced. This belt attaches between the engine drive pulley and the transmission's drive pulley. Refer to your make, model and diagrams to ensure this part is right for you.

This manufacturer-certified Left Hand Bolo Tine attaches to the left tine holder, and is used to dig up dirt in the area being tilled. This part is constructed of black metal, is rated as "easy" to install, and requires a wrench set. If the part appears damaged or no longer works, it should be replaced. Refer to your make, model, and diagrams to check if this part is correct.

The Reverse Drive Belt is a 13 x 3/8 inch is a black rubber belt which attaches to the transmission and engine drive pulleys. This belt allows you to drive the unit backwards. If it's broken due to fatigue, or damage, you will no longer be able to drive backwards and the part must be replaced. Installation is rated as "Easy" by customers ...Read moreand requires pliers, a socket set and a wrench set. Refer to your make, model and diagrams to ensure this is the right part for you.

The Right Bolo Tine attaches to the right tine holder, and is used to dig up dirt in the area being tilled. This part is approved by the original manufacturer, and is constructed of black metal. Its installation is rated as easy by our customers, and will require only a wrench set. If the part appears damaged or no longer works, it should be replaced.

This OEM Wheel Shaft Oil Seal is a black rubber part which attaches to the drive shaft to prevent leaks between the wheel shaft and transmission case. Installation is rated as "Medium" difficulty and requires a Screwdriver, Hammer, Washer, and Pipe to fit in the seal. If broken due to damage/fatigue, there will be a leak and the part shou...Read moreld be replaced. Refer to your make, model, and diagrams to ensure this is the right part for you.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This OEM Forward Idler Pulley attaches to the pivot bracket to allow the forward belt to idle when not in forward motion. If broken, the machine will no longer be able to propel forward, and the part must be replaced. This part is rated as "Easy" to install by customerss, and requires a wrench set. It is individually sold, and constructed...Read more of metal. Refer to your make, model and diagrams to ensure this is the right part.

This forward drive belt is an authentic Troy-Bilt part manufactured for use with tillers. This rubberized belt is driven by the engine drive pulley, and connects to the transmission pulley to move the tiller forward. It is important to replace worn belts to maintain optimal performance. Be sure to clean the pulleys when installing the belt, the belt is sold individually.

This part is sourced from the original equipment manufacturer for MTD, Yard Machines, and Troy-Bilt walk-behind lawn mowers. The spring applies tension on the connected component allowing it to retract. It is an identical replacement for a faulty or a missing hardware that was installed on a new unit. Refer to the diagrams for your model ...Read moreto ensure the correct repair procedure. This high-quality reverse return spring is made of durable metal and is sold as an individual item.