1215^1A Whirlpool Range Parts & Repair Help | PartSelect
Models > 1215^1A

1215^1A Whirlpool Range - Overview

Get Parts and Repair Help for 1215^1A

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(11)
PartSelect #:PS11740783
Manufacturer #:WP3149400
This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your...
$49.63
In Stock
Order within the next 7 hrs and your part ships today!
(10)
PartSelect #:PS11723153
Manufacturer #:W10820036
This 3 prong lid switch is used for washing machines that do not have a tub light.
$27.16
In Stock
Order within the next 7 hrs and your part ships today!
PartSelect #:PS340509
Manufacturer #:326795
This is a five-loop broil element for an oven, range, or stove. It is approximately 11-3/4 inches wide and 18-5/8 inches long with approximately 11-3/4 inches between terminal conn...
$64.45
In Stock
Order within the next 7 hrs and your part ships today!
PartSelect #:PS359972
Manufacturer #:4333737
This is for use on gas burners. * This part may differ in appearance from the original, but functions the same as original part.
No Longer Available
PartSelect #:PS11743766
Manufacturer #:WP691371
This part rotates the blower fan wheel
$43.21
In Stock
Order within the next 7 hrs and your part ships today!
PartSelect #:PS366262
Manufacturer #:4363560
No Longer Available
PartSelect #:PS336493
Manufacturer #:313563
No Longer Available
PartSelect #:PS360044
Manufacturer #:4334894
No Longer Available
PartSelect #:PS359865
Manufacturer #:4332653
No Longer Available
PartSelect #:PS360083
Manufacturer #:4335201
No Longer Available
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the element did not turn compleatly off, the on light stayed on.

  • Customer: chaz from fairplay, CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 71 of 80 people found this instruction helpful
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. removed each wire fro... read more

Burner would go high without warning

  • Customer: John from Clinton, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 45 of 46 people found this instruction helpful
We felt the only possible problem could be the switch assembly. I removed the switch panel, removed the wires from the old switch, one at a time, removed the old switch assembly and installed the new switch assembly. The extended stem did have to be snapped off (per your instructions) and that too was a very simple task. read more

Left front burner would not adjust heat downward

  • Customer: ALTON from ROUND ROCK, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 32 of 37 people found this instruction helpful
Pull unit away from wall.
Unplug power
remove topmost four screws from rear metal cover
Pull knob off switch shaft.
Remove two screws holding switch to panel.
Break off shaft of new switch to correct length.
Remove each wire from old switch and attach to Corresponding lug on new switch.
Reattach the new switch to the panel... read more