Models > 1189

1189 - Overview

Models starting with 1189

Click on the best match to narrow your results.

Exact Part matches for your search term

[Viewing 2 of 2]
DISCONTINUED – Part Number: 1189
DISCONTINUED
This part number matches the current model number 1189
PartSelect #: PS9387410
Manufacturer #: 1189
  No Longer Available
Nut – Part Number: 1189
Nut
This part number matches the current model number 1189
PartSelect #: PS16260128
Manufacturer #: 1189
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.43
  In Stock
Fuel Valve W/Bushing – Part Number: 192980GS
Fuel Valve W/Bushing
★★★★★
★★★★★
(5)
PartSelect #: PS8911051
Manufacturer #: 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve a...
$19.31
  In Stock
Plug-Spark – Part Number: 491055S
Plug-Spark
★★★★★
★★★★★
(2)
PartSelect #: PS9281094
Manufacturer #: 491055S
$4.99
  In Stock
Cap, Fuel Gauge – Part Number: B4363GS
Cap, Fuel Gauge
★★★★★
★★★★★
(2)
PartSelect #: PS9314364
Manufacturer #: B4363GS
This OEM replacement fuel gauge cap is designed for use in generators. It comes in a cylindrical shape and has a built-in window to easily view the fuel levels without pulling out the entire cap. It i...
$45.30
  In Stock
Pin, Hair – Part Number: 703300
Pin, Hair
PartSelect #: PS9999596
Manufacturer #: 703300
The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manu...
$4.99
  In Stock
Zip Tie – Part Number: WPW10339879
Zip Tie
PartSelect #: PS11753208
Manufacturer #: WPW10339879
A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly t...
$8.06
  In Stock
Screw (Magneto Armature) – Part Number: 691061
Screw (Magneto Armature)
PartSelect #: PS9063630
Manufacturer #: 691061
$3.99
  In Stock
Grommet,Tank – Part Number: 83465GS
Grommet,Tank
PartSelect #: PS9307985
Manufacturer #: 83465GS
$5.19
  In Stock
Support, Leg – Part Number: B1764GS
Support, Leg
★★★★★
★★★★★
(1)
PartSelect #: PS9184762
Manufacturer #: B1764GS
  No Longer Available
Screw – Part Number: WP965173
Screw
PartSelect #: PS11746895
Manufacturer #: WP965173
Sold individually.
$5.99
  In Stock
Tube Clamp – Part Number: WP488366
Tube Clamp
PartSelect #: PS11742715
Manufacturer #: WP488366
Sold individually.
$7.44
  In Stock
Assembly, Holder, Brush – Part Number: 66386GS
Assembly, Holder, Brush
PartSelect #: PS9063496
Manufacturer #: 66386GS
The brush holder assembly in your generator keeps the brushes in place, allowing them to touch the rotor. It consists of a plastic brush holder and two carbon brushes with lead wires and attached spri...
$25.41
  In Stock
View More
Back to Top

Common Symptoms of models starting with 1189

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Parts Used:
Fuel Valve W/Bushing
  • James from PICAYUNE, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank
Parts Used:
Fuel Valve W/Bushing
  • Alan from RADFORD, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
major gas leak on my generator
popped out the old-----the bushing failed. replaced as per the included instructions
Parts Used:
Fuel Valve W/Bushing
  • John from LEES SUMMIT, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
5 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top