Models > 1171WL-36GK

1171WL-36GK Admiral Cooktop - Overview

Sections of the 1171WL-36GK

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Spark Module - Surface Burners – Part Number: 12001596
Spark Module - Surface Burners
★★★★★
★★★★★
(10)
PartSelect #: PS2003170
Manufacturer #: 12001596
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$60.64
  In Stock
Order within the next 4 hrs and your part ships today!
Burner Grate – Part Number: WP2003X030-00
Burner Grate
PartSelect #: PS11738737
Manufacturer #: WP2003X030-00
This square burner grate has sides measuring almost nine inches long. It is all black in color. Sold individually.
$89.05
  In Stock
Order within the next 4 hrs and your part ships today!
Screw - 6-32 x 5/16 – Part Number: WP74004005
Screw - 6-32 x 5/16
PartSelect #: PS11744050
Manufacturer #: WP74004005
This screw is well under an inch long, and is made of metal.
$4.12
  In Stock
Order within the next 4 hrs and your part ships today!
Gas Pressure Regulator – Part Number: 74006282
Gas Pressure Regulator
PartSelect #: PS2083974
Manufacturer #: 74006282
This valve automatically cuts off the flow of gas at a certain pressure.   No Longer Available
Spark Igniter Switch – Part Number: 7403P191-60
Spark Igniter Switch
PartSelect #: PS2089415
Manufacturer #: 7403P191-60
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.   No Longer Available
Control Panel Trim - Black – Part Number: 7720P142-60
Control Panel Trim - Black
PartSelect #: PS2091673
Manufacturer #: 7720P142-60
This control panel trim piece is just under thirteen inches long. It is almost seven inches wide, and it has white lettering on the front. This piece of trim is made of metal and has five holes for surface burner knobs.   No Longer Available
SCREW – Part Number: 3400023
SCREW
PartSelect #: PS345999
Manufacturer #: 3400023
  No Longer Available
Lock Nut – Part Number: WPW10131078
Lock Nut
PartSelect #: PS11748738
Manufacturer #: WPW10131078
$3.96
  On Order
COVER- BUR – Part Number: 7724P004-60
COVER- BUR
PartSelect #: PS2091709
Manufacturer #: 7724P004-60
  No Longer Available
Power Cord – Part Number: 12400044
Power Cord
PartSelect #: PS1573899
Manufacturer #: 12400044
  No Longer Available
SWITCH, IGN LT RR – Part Number: 7403P193-60
SWITCH, IGN LT RR
PartSelect #: PS2089417
Manufacturer #: 7403P193-60
  No Longer Available
KNOB, VALVE – Part Number: 7733P048-60
KNOB, VALVE
PartSelect #: PS2091882
Manufacturer #: 7733P048-60
  No Longer Available

Questions And Answers for 1171WL-36GK

Be the first to ask our experts a question about this model!

Common Symptoms of the 1171WL-36GK

[Viewing 3 of 3]
Will Not Start
Fixed by
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No spark at top burners, first one then eventually all 4.
Most of the repair time was spent researching the problem online, locating the spark module inside the range, and selecting the part online. Installation was easy. Key troubleshooting info for me was, if there is no clicking, the spark unit is probably worn-out. I traced the ignition wires from the burners down to the spark module, located inside a 2x3" metal housing next to the bottom drawer. I removed 2 screws and out it came. The replacement unit pictured on the PartSelect site was not identical to the original but had the same number of contacts. I ordered the part and it arrived a few days later. The old connectors slipped easily onto the new pins, and I screwed the new unit into the range using the new metal housing. All 4 burners now spark up quickly, and we saved at least $100 on a service call. It was well worth the time and effort -- thanks!
Parts Used:
Spark Module - Surface Burners
  • jonathan from Bryson City, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
29 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners would not ignite
Pulled the stove out from the wall. Removed the left side of the stove. Removed the wires from the old igniter. Modified four of the wire ends with the proper size spade connectors (supplied with the new part). Reinstalled the wires onto the new part. Tested the burners. Reinstalled the stove side. Moved the stove back into position.
Parts Used:
Spark Module - Surface Burners
  • Craig from Sequim, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
16 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original light grey color grates stained and unsightly--no amount of scrubbing or cleansers would make them look nice.
Opened the box and took out the black color grates~~removed discolored grates and put the new ones on. Looks like a brand new stove and much nicer to look at as it is the first thing you see when you enter the kitchen.
Parts Used:
Burner Grate
  • Linda from Jenison, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
15 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!