Models > 1130SE

1130SE ((1999)) Cub Cadet Snow Blower - Overview

Sections of the 1130SE

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
  In Stock
Slide Shoe – Part Number: 784-5580-0637
Slide Shoe
PartSelect #: PS9135084
Manufacturer #: 784-5580-0637
This Slide Shoe is rated as "Easy" to install and requires a wrench set. It is a manufacturer-approved part that comes in black and is constructed of metal. The part is used to help the snowblower sli...
  In Stock
Drive Clutch Cable 39.88 – Part Number: 946-0898
Drive Clutch Cable 39.88
PartSelect #: PS9170572
Manufacturer #: 946-0898
  In Stock
Auger Clutch Cable – Part Number: 946-0897
Auger Clutch Cable
PartSelect #: PS9170571
Manufacturer #: 946-0897
  In Stock
Plastic Bushing .380 ID – Part Number: 941-0475
Plastic Bushing .380 ID
PartSelect #: PS9167515
Manufacturer #: 941-0475
This is an authentic OEM part for Craftsman lawn and garden equipment. This bushing has an internal diameter of 0.380", is made of durable black plastic, is not part of an assembly or kit, and is sold...
  In Stock
Hex Flange Bearing – Part Number: 941-0245
Hex Flange Bearing
PartSelect #: PS9178250
Manufacturer #: 941-0245
  On Order
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
  In Stock
Spring-Extension – Part Number: 932-0264
PartSelect #: PS9310931
Manufacturer #: 932-0264
This is a genuine OEM sourced part that is not part of a kit or assembly and is sold individually. This Spring Extension, or Extension Spring, serves a variety of purposes, depending on your model. It...
  In Stock
Hex L-Nut 5/16-18 Thd. – Part Number: 912-0429
Hex L-Nut 5/16-18 Thd.
PartSelect #: PS9164534
Manufacturer #: 912-0429
  No Longer Available
Spring-Extension – Part Number: 932-0611
PartSelect #: PS9163468
Manufacturer #: 932-0611
  In Stock
Extension Spring – Part Number: 932-0710
Extension Spring
PartSelect #: PS9163399
Manufacturer #: 932-0710
  In Stock
Shave Plate 26" – Part Number: 790-00121-0637
Shave Plate 26"
PartSelect #: PS9306314
Manufacturer #: 790-00121-0637
  In Stock

Questions And Answers for 1130SE

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, apply heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Parts Used:
Shave Plate 26&#34
  • John from HARRISVILLE, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!