10955 (003101) Ariens Snow Blower - Overview

This shear bolt comes with a nut and is made for listed equipment built before 2008. The bolt is designed to break when the machine meets too much force, which can help protect other parts from damage. Replace a broken shear bolt only with the correct size and strength. A standard bolt may not break as needed. Check the equipment manual a...Read morend compare the length, width, thread, nut, and rating of the original fastener before use.

The Runner is a 6 x 3.5 inch, orange, metal part which is used to allow the snowblower to glide smoothly on the ground. It's installed using a wrench or socket, and its installation has been rated "Easy" by customers. If broken, the auger housing will drag on the ground and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part.

This OEM flange bearing in your lawn equipment supports smooth movement in the gear case and impeller. It reduces friction and ensures stability for rotating components like gears or impeller shafts. If the flange bearing is damaged, you may hear grinding or squeaking sounds, and it may show signs of cracks, wear, or deformation. Neglecti...Read moreng a broken flange bearing can lead to additional damage to the gear case and impeller assembly, potentially causing equipment failure. To remove a faulty bearing, turn the machine off and disconnect it from any power source. Remove any covers, guards, or components that provide access to the gear case and impeller assembly. This may involve loosening screws, bolts, or clips. Consult your user manual to locate the flange bearing. Use a screwdriver or wrench to remove any fasteners that secure the flange bearing before detaching the bearing itself. Please note that this flange bearing is sold individually and does not include any accompanying hardware.

This is an OEM Ariens part directly sourced from the manufacturer for use in snowblowers. The seal attaches to the gear case and is made of metal. During replacement, it may require a socket set to help install this part correctly. It may become broken and will need to be replaced. This is available as an individual replacement part.

This is a genuine Ariens replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal bushing fits into the bearing support to provide spacing between the rake shaft and the support. The bushing is sold as an individual replacement part.

It is a genuine OEM sourced part that is designed for use with Ariens snow blowers and lawn tractors. This is a special component that helps to secure the bearing. It is a high-quality replacement for a faulty or a missing bearing flange that was installed on a new unit. To ensure the exact location and the correct installation of this ha...Read morerdware make sure to check the appropriate diagrams of your model. This authentic bearing flange is made of durable metal and is sold individually.

This is an authentic manufacturer-sourced part which is specially designed for use with Ariens lawn and garden equipment. It is an identical replacement for a missing or damaged ball bearing that was installed on a new unit. The bearing allows connected part to rotate with minimum friction, unfortunately, over time components will wear ou...Read moret and may begin to fail eventually requiring a replacement. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine item that is supplied from the original equipment manufacturer for Ariens lawn and garden equipment. It is an identical replacement for missing or a faulty roll pin that was installed on a new unit, please make sure to refer the appropriate diagrams of your model for the correct location and application of this hardware....Read more Keep in mind this high-quality part is made of durable metal and is sold individually.

This Bearing Cone, or Cone Bearing, is used to support the helicon pinion shaft to allow it to rotate where it passes through an assembly. It is sourced directly from the manufacturer for use in snow blowers, is made of metal, is silver, is not part of a kit or assembly, and is sold individually. A grinding, growling, or squealing sound ...Read morefrom your bearing suggests that your bearing cone will need to be replaced. If you find signs of wear, fatigue, or damage on the Cone, it needs to be replaced. You will need a wrench set, a socket set, a screwdriver, and a nut driver to complete this repair. When you install the new Cone, ensure that you pack the bearing with grease before installing it. Customers rate this repair as Medium difficulty.

This is a genuine OEM sourced replacement part which is specially designed for use with Ariens lawn and garden equipment. This is a standard hardware which has multiple applications based on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this item. Keep in mind this high-quality item is made of durable metal and is sold individually.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This Bearing Cup is a genuine replacement part for various models of snow blowers. It is used to carry the maximum combinations of radial and thrust loads simultaneously. It is made of metal, is silver, is not part of a kit or assembly, and is sold individually. This part may make a grinding noise when it is malfunctioning. It should be...Read more replaced when it is visibly worn or damaged. It is found on the helicon shaft with the Cone Bearing and Adjustment Plug. You will need a screwdriver, pliers, a socket set, and a wrench set to complete this repair. Customers rate this repair as Medium difficulty.

Can be used to re-coat dryer drums.