Models > 099772-0100-01

099772-0100-01 Briggs and Stratton Engine - Overview

Sections of the 099772-0100-01

[Viewing 10 of 10]
Keep searches simple, eg. "belt" or "pump".
Carburetor Overhaul Kit – Part Number: 498260
Carburetor Overhaul Kit
★★★★★
★★★★★
(3)
PartSelect #: PS8984098
Manufacturer #: 498260
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of r...
$21.42
  In Stock
Order within the next 4 hrs and your part ships today!
Starter Pawl-Ratchet – Part Number: 281505S
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$3.94
  In Stock
Order within the next 4 hrs and your part ships today!
Kit-Needle/Seat – Part Number: 398188
Kit-Needle/Seat
★★★★★
★★★★★
(1)
PartSelect #: PS8963322
Manufacturer #: 398188
$7.41
  In Stock
Order within the next 4 hrs and your part ships today!
Pulley/Spring Assembly – Part Number: 498144
Pulley/Spring Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS8988822
Manufacturer #: 498144
$20.82
  In Stock
Order within the next 4 hrs and your part ships today!
Starter-Rewind – Part Number: 497680
Starter-Rewind
★★★★★
★★★★★
(2)
PartSelect #: PS8981884
Manufacturer #: 497680
This recoil starter is for lawn and garden equipment engines. Recoil starter spins the crankshaft to start the engine when you pull the rope.
$119.70
  In Stock
Order within the next 4 hrs and your part ships today!
Bowl-Float – Part Number: 796611
Bowl-Float
★★★★★
★★★★★
(1)
PartSelect #: PS9306908
Manufacturer #: 796611
$7.53
  In Stock
Order within the next 4 hrs and your part ships today!
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$3.10
  In Stock
Order within the next 4 hrs and your part ships today!
Seal-Oil – Part Number: 299819S
Seal-Oil
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$5.38
  In Stock
Order within the next 4 hrs and your part ships today!
Line-Fuel – Part Number: 791745
Line-Fuel
PartSelect #: PS9140673
Manufacturer #: 791745
$10.52
  In Stock
Order within the next 4 hrs and your part ships today!
Plate-Pawl Friction – Part Number: 692299
Plate-Pawl Friction
★★★★★
★★★★★
(1)
PartSelect #: PS9074726
Manufacturer #: 692299
$5.38
  In Stock
Order within the next 4 hrs and your part ships today!
Float-Carburetor – Part Number: 398187
Float-Carburetor
PartSelect #: PS8961149
Manufacturer #: 398187
$9.92
  In Stock
Order within the next 4 hrs and your part ships today!

Questions And Answers for 099772-0100-01

Be the first to ask our experts a question about this model!

Common Symptoms of the 099772-0100-01

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel, pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
Parts Used:
Starter-Rewind
  • Seikai from MARICOPA, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!