0991 - Overview

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This is an authentic item that is supplied by the original equipment manufacturer for use with Toro lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this i...Read moretem. Keep in mind this high-quality nut is made of durable metal and is sold individually.

The flat washer is an OEM replacement part that provides a wide surface area to distribute the load of a bolt or a screw when it is installed. This protects the part being fastened from getting damaged or deformed and provides a more secure fit for the bolt/screw. This flat washer is made of steel and has a diameter of 0.375 inches and a ...Read morethickness of approximately 0.063 inches. To replace the flat washer, first unthread the bolt/screw before using a flathead screwdriver to carefully pry it off. Clean the area, place the new flat washer in position, and thread the bolt/screw back on. Sold individually.

This is an authentic replacement part manufactured for use with Toro snowthrowers. The special hex head screw is used with a variety of different snowthrower models and has multiple applications. This screw is available as an individual replacement part, please see model diagram for associative parts.

This item is priced individually. The flat washer goes next to the hub cap and is made of metal. During the installation process, a wrench might be needed to replace this part. It will need to be replaced if it bends or breaks. This is a genuine Toro part sourced directly from the manufacturer for use in lawn mowers and lawn tractors.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal washer is commonly used to disperse pressure put on the auger housing by the nut that fastens the chute retainer across a wider surface area. This bolt is sold individually.

This is an original Craftsman replacement part manufactured for use with snow blades. The control cable is used to link the control lever to the cable bracket and is used to adjust the position of the snow blade. This control cable is available as an individual replacment part.

This is an authentic Toro replacement part manufactured for use with snowthrowers. The special screw is commonly used to secure idler pulleys either near the engine or on the frame. This screw is used with different models of snowthrowers and pulley this screw can vary depending on the model of machine. The screw is available as an individual replacement part, please see model diagram for part location and usage.

This OEM lock nut is used in your lawn equipment to keep its parts securely fastened and prevent them from coming loose. It is often found at the end of a threaded bolt. This lock nut has a nylon insert inside and a diameter of 3/4 inches. Over time, the lock nut can wear out due to regular use. When this happens, you may hear strange kno...Read morecking or rattling noises coming from your machine. You may also feel more vibrations from it than usual. If you take a close look at the nut, it might appear bent or deformed. If you do not replace a worn-out lock nut, the parts of your machine can fall off. To replace a lock nut, you need a socket wrench to loosen it from your machine. Since this lock nut is sold individually, consult your instruction manual to determine how many your machine needs. If you are replacing one lock nut, it is recommended that you replace all of them as they tend to wear out at the same time.