08794 - Overview

This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this hig...Read moreh-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

The Nut-Flange, Ni, simply known as a Flange Nut, is a silver metal individually sold part which can be applied with a wrench or socket and torque wrench. Simply torque the part to the manufacturer specifications. It is used to secure the idler arm assembly to the frame, and will need to be replaced if damaged. You can tell if it is brok...Read moreen if there are signs of visible damage, or the part won't tighten all the way due to damaged threads. Customers rated this repair as easy.

This replacement flat washer is sourced directly from the original equipment manufacturer, it is specially designed for use with Toro riding lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure a tight fit, please refer to the appropriate diagrams of your model for the correct location an...Read mored application of this hardware. Keep in mind this durable metal washer is sold individually.

This is an authentic Toro replacement part. The flat washer is commonly found in a variety of Toro yard machines such as lawn mowers and snow throwers. The flat washer is generally used to provide space and protection between a nut or bolt head and a housing. Please be aware that there are different washers used in the machine. Refer ...Read moreto the parts diagram to be sure of ordering the correct part. You may require a wrench, screwdriver, or pliers to replace this item. This part is sold individually.

This high-quality OEM sourced replacement hardware is specially made for use with Toro lawn and garden equipment. It is a standard hardware that may have multiple applications. Check the appropriate diagrams of your model for the exact location and application of this component. This high-quality screw is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This is an OEM part sourced directly from the manufacturer. The brush is designed for use in generators from Briggs & Stratton. This part is a complete carbon brush assembly, which is used to supply power to the rotor. You may require a screwdriver or Allen wrench when replacing this part. This item is sold individually.

This connector is sourced from the original manufacturer as a replacement part for use in generators. The connector has 6 pins/terminals which allow the joining of various electrical cables and components in the generator. Over time the connector can break or wear down, rendering it unable to secure components together. This can result in...Read more electrical hazards, overheating, instability, and loose connections. Disconnect the wires/cables connected to the old connector and remove it from the housing. Place the new connector in the housing and reconnect the wires to the appropriate terminals, following the guidelines in your equipment manual.

This is an authentic OEM sourced replacement screw which is specially produced for use with Toro snowthrowers. It is one of the screws used to secure the auger, please refer to appropriate diagrams for the correct location and application of this hardware. This hex head screw is made of high-quality metal and it is sold individually.