0500145 Wagner Sprayer - Overview

This suction tube is compatible with various makes and models of airless paint sprayers and is sold as an individual OEM part. It draws paint from the container/reservoir and delivers it to the sprayer for application. This tube has a built-in filter attached, to prevent dust, dirt, or debris from entering the sprayer system. When suction...Read more tubes become clogged/blocked, damaged, or lose their suction, they can become inoperable and will lose any and all function. It is recommended that you regularly inspect the tube for damage or clogs, and if you notice your sprayer leaking from connection points around the tube or inconsistent spray patterns and suction ability, the tube is likely needing replacement. To replace this tube within your paint sprayer assembly, disconnect your sprayer from power and relieve the pressure within the sprayer. Drain all paint from the sprayer and paint reservoir to avoid mess. Remove the old suction tube by unscrewing it and/or any securing hardware, and then install the new tube with the same process as before. With the new tube installed, perform a test run with the sprayer to ensure the suction tube works properly before using it normally.

This is an OEM part sourced directly from the manufacturer. The return tube fitting is commonly found in paint sprayers from Titan, SprayTECH, and Wagner. This part is made of high-quality plastic, and is attached to the pump assembly to connect the return tube. You may require pliers when replacing this item. This product is provided as an individual replacement part.

This replacement part is supplied by the original manufacturer and is designed for use with sprayers. The purpose of this suction set is to supply the material from the tank to the unit. Over time it may deteriorate and become brittle eventually requiring a replacement. Check the appropriate diagrams and the owner\\\'s manual for your mod...Read moreel for the correct application. Note, this high-quality suction set is sold as an individual item.

This reversible spray tip guard attaches to the spray gun and is sold individually. The spray tip is sold separately. It is made out of metal and plastic and is a 7/8" g-thread. If this part becomes broken a wrench may be needed during the replacement. This part is an OEM from Wagner and SprayTECH for use in airless paint sprayers.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Wagner and SprayTECH sprayers. It is an identical replacement for a faulty or a missing spray tip that was included with a new reel. The part helps to produce a fine spray, please make sure to refer to the owners manual of your model for...Read more the correct location and application of this hardware. Keep in mind this high-quality tip is made of durable metal with plastic and is sold individually.