Models > 0057780

0057780 ((5666402 - 6168987)(2010)) Generac Generator - Overview

Sections of the 0057780

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Brush Holder – Part Number: 0H0919
Brush Holder
PartSelect #: PS9874210
Manufacturer #: 0H0919
$4.99
  In Stock
Fuel Gage, 153 Mm Long Arm – Part Number: 0H1345
Fuel Gage, 153 Mm Long Arm
★★★★★
★★★★★
(1)
PartSelect #: PS9874231
Manufacturer #: 0H1345
$12.94
  In Stock
Cover, 20A 120V Gfci/Duplex – Part Number: 0G9392
Cover, 20A 120V Gfci/Duplex
PartSelect #: PS9874153
Manufacturer #: 0G9392
$18.05
  In Stock
Fuel Filter – Part Number: 0H1326
Fuel Filter
PartSelect #: PS9874228
Manufacturer #: 0H1326
$4.99
  In Stock
Cover,30A 120/240V – Part Number: 0G9391
Cover,30A 120/240V
PartSelect #: PS9874151
Manufacturer #: 0G9391
$34.58
  On Order
Spark Plug Gap: 0.030" – Part Number: 0E7585
Spark Plug Gap: 0.030"
PartSelect #: PS9873931
Manufacturer #: 0E7585
$5.56
  In Stock
Clamp, Hose Band Green – Part Number: 048031G
Clamp, Hose Band Green
PartSelect #: PS9868951
Manufacturer #: 048031G
$3.99
  On Order
Cb 20A 1P 120V Cul/Csa Joemex – Part Number: 0H0265C
Cb 20A 1P 120V Cul/Csa Joemex
PartSelect #: PS9874184
Manufacturer #: 0H0265C
$22.79
  On Order
Fuel, Valve Holder – Part Number: 0H2142
Fuel, Valve Holder
PartSelect #: PS9874258
Manufacturer #: 0H2142
$4.99
  In Stock
Fuel Line, Formed Valve To Eng. – Part Number: 0H5762
Fuel Line, Formed Valve To Eng.
PartSelect #: PS9874717
Manufacturer #: 0H5762
$8.59
  In Stock
Filter, Fuel – Part Number: 0D6313
Filter, Fuel
PartSelect #: PS9873844
Manufacturer #: 0D6313
$4.99
  In Stock
Fuel, Valve – Part Number: 0H3419
Fuel, Valve
PartSelect #: PS9874425
Manufacturer #: 0H3419
$9.71
  In Stock

Questions And Answers for 0057780

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fuel gauge on generator fuel tank was no longer showing the fuel level.
Repair was very simple. Removed two screws securing the fuel gauge to the tank. Pull out old gauge, insert new gauge, and install the two screws. Done! The replacement part did not include the sticker around the sight window on the gauge. Peeled the sticker off the old gauge, applied a little Gorilla glue and placed the sticker on the new gauge.
Parts Used:
Fuel Gage, 153 Mm Long Arm
  • John from THE WOODLANDS, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!