My Orders
MTD Tiller Control Cables
GET YOUR OFFICIAL MTD PARTS TO ENSURE VICTORY
Shop By Part Type
View MorePopular MTD Tiller Control Cables
This is a genuine manufacturer-sourced replacement component which is specially designed for use with Bolens and Troy-Bilt tillers. The throttle cable is connected to the carburetor and it stops the engine when you shift the lever to the full choke position. It is a high-quality rubber insulated part is sold individually, please note, the housing, the trigger and the hardware are all sold separately.
This is a genuine manufacturer-sourced replacement component which is specially designed for use with Bolens and Troy-Bilt tillers. The throttle cable is connected to the carburetor and it stops the engine when you shift the lever to the full choke position. It is a high-quality rubber insulated part is sold individually, please note, the housing, the trigger and the hardware are all sold separately.
This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to secure the clutch control handle and cable together. This holder is made of durable plastic and can replace the old holder by simply removing it, inserting the cable into the new holder, and tightening it until it is locked in place.?
This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to secure the clutch control handle and cable together. This holder is made of durable plastic and can replace the old holder by simply removing it, inserting the cable into the new holder, and tightening it until it is locked in place.?
This reverse control cable is designed to manage the reverse gear function on rotary tillers, allowing smooth and reliable engagement when backing up during operation. Built for durability and consistent performance, it helps maintain proper control and responsiveness of the reverse mechanism. Ideal for replacing a stretched or damaged cable, it restores dependable reverse operation and easier handling during tilling tasks.
This reverse control cable is designed to manage the reverse gear function on rotary tillers, allowing smooth and reliable engagement when backing up during operation. Built for durability and consistent performance, it helps maintain proper control and responsiveness of the reverse mechanism. Ideal for replacing a stretched or damaged cable, it restores dependable reverse operation and easier handling during tilling tasks.
This is an authentic replacement part manufactured for use with gas powered tillers. The special throttle cable is used to link the throttle control and the throttle valve on the carburetor. This throttle cable is available as an individual replacement part, please see model diagram for associative parts.
This is an authentic replacement part manufactured for use with gas powered tillers. The special throttle cable is used to link the throttle control and the throttle valve on the carburetor. This throttle cable is available as an individual replacement part, please see model diagram for associative parts.
Installation Instructions
James from HAGARVILLE, AR
Throttle cable seized up!
Just replace like the old one! Not hard at all.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
It is a genuine OEM sourced replacement control cable which is commonly installed on garden tillers. This is is the cable that stops the tine when the control lever is released, if the cable is broken it will cause the tine to not engage even when the lever is pressed. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Please note this high-quality rubber insulated cable is sold individually. Replacing it is a simple task that should only require a screwdriver and pliers.
It is a genuine OEM sourced replacement control cable which is commonly installed on garden tillers. This is is the cable that stops the tine when the control lever is released, if the cable is broken it will cause the tine to not engage even when the lever is pressed. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Please note this high-quality rubber insulated cable is sold individually. Replacing it is a simple task that should only require a screwdriver and pliers.
This is an authentic part that has been sourced from the original equipment manufacturer for be used with lawn and garden equipment. The part helps to support and guide the cable. It is an identical replacement for a missing or a damaged component that was installed on a new unit. Keep in mind this high-quality cable guide is sold as an individual item.
This is an authentic part that has been sourced from the original equipment manufacturer for be used with lawn and garden equipment. The part helps to support and guide the cable. It is an identical replacement for a missing or a damaged component that was installed on a new unit. Keep in mind this high-quality cable guide is sold as an individual item.
This clutch control cable is an OEM part made to be used with your garden tiller. Its function is to engage the clutch in order to drive the tiller. This part is black and silver in color, composed of metal with a rubberized coating, and it is sold individually. Over time, this part can snap or break due to regular use, and when this occurs, the clutch will not function properly when applied, meaning you will no longer be able to control the drive of your tiller.
Replacing this part is easy, however, and only requires a pair of pliers.
This clutch control cable is an OEM part made to be used with your garden tiller. Its function is to engage the clutch in order to drive the tiller. This part is black and silver in color, composed of metal with a rubberized coating, and it is sold individually. Over time, this part can snap or break due to regular use, and when this occurs, the clutch will not function properly when applied, meaning you will no longer be able to control the drive of your tiller.
Replacing this part is easy, however, and only requires a pair of pliers.
This is an authentic replacement part manufactured for use with walk-behind lawnmowers. This cable is connected to the control handle that is pressed down while running the lawnmower. The cable has shaped connections at each end to attach it to the handle and engine. This cable is sold individually.
This is an authentic replacement part manufactured for use with walk-behind lawnmowers. This cable is connected to the control handle that is pressed down while running the lawnmower. The cable has shaped connections at each end to attach it to the handle and engine. This cable is sold individually.
This is a genuine manufacturer-sourced replacement throttle cable which is specially designed for use with MTD tillers. It is connected to the carburetor and it stops the engine when you shift the lever to the full choke position, over time it may wear out and break eventually requiring a replacement. This high-quality metal throttle cable is sold individually, please note the housing, the trigger, and the hardware are all sold separately.
This is a genuine manufacturer-sourced replacement throttle cable which is specially designed for use with MTD tillers. It is connected to the carburetor and it stops the engine when you shift the lever to the full choke position, over time it may wear out and break eventually requiring a replacement. This high-quality metal throttle cable is sold individually, please note the housing, the trigger, and the hardware are all sold separately.