Jenny Compressor Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Jenny Compressor Parts
Jenny Compressor Discharge Valve
PartSelect Number PS10375230
Manufacturer Part Number 610-1032
This is the discharge valve assembly for a variety of pumps. This OEM valve assembly does not come with the pump head, but features a retaining clip, spring, valve disc and valve bumper, all of which measure approximately 1-inch in diameter. Over time, valves can collect debris or corrode, and with normal wear and tear, they can get damaged, leak, or restrict the flow of fluid through the pump. If your pump is leaking on/around the discharge valve, or if the pump has higher pressure or a low flow rate, this discharge valve would be worth inspecting to see if it needs replacing. Replacing this assembly is easy and requires you to first power off the pump and disconnect the pump head and gasket. You can then remove the old assembly and install the new one. It is recommended that you replace the gasket at this juncture as well, but it is not mandatory. With the new assembly installed, reinstall the pump head and test your pump.
Jenny Compressor Valve-suction
PartSelect Number PS10375229
Manufacturer Part Number 610-1031
This suction valve, also known as a discharge valve, is sourced from the original equipment manufacturer for use in air compressors. It is responsible for ensuring that air is drawn into the cylinder when the piston moves downward. When the piston moves back up during the compression stroke, the suction valve closes to prevent the compressed air from flowing back into the suction line. It includes the valve spring, valve retainer, valve seat, and valve guard. Over time, the valve may wear out, become clogged with debris, or become damaged, leading to overheating, reduced power output, and low pressure. Begin the repair by disconnecting the compressor from the power source. Locate the suction valve in the pump head and remove the valve guard. Remove the valve seat and detach the suction valve and spring. Place the new valve components in the pump head and ensure they are securely fitted.
Jenny Compressor Gasket-plate
PartSelect Number PS10374574
Manufacturer Part Number 104-1007
This is the gasket that helps to create an air tight seal between the valve plate and the cylinder, for correct application make sure to check appropriate diagram if your unit. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is a high quality replacement part that is supplied by original manufacturer for use with Jenny pumps. Please note this part is made with durable composite material and it is sold individually.
Jenny Compressor Gasket-head
PartSelect Number PS10374575
Manufacturer Part Number 104-1008
This is a genuine Jenny replacement part that is sourced from original equipment manufacturer for use with portable electric pumps. Its purpose is to make an air tight seal between the cylinder head and the valve plate. Over time gaskets tend to deteriorate and get compressed eventually requiring replacement. Please note one durable composite material gasket is included per order.
Jenny Compressor Pad-rubber
PartSelect Number PS10374594
Manufacturer Part Number 104-1249
This is a genuine Jenny replacement part for use in compressors. The rubber pad attaches the portable dual tank. A hammer may be needed during the replacement of this part. It will need to be replaced if it breaks. This item is sold individually.
Jenny Compressor Gasket-cylinder
PartSelect Number PS10374573
Manufacturer Part Number 104-1006
This is an OEM replacement part for use in Jenny stroke pumps and compressors. The cylinder gasket fits between the right bank and the left bank and helps to provide a seal. It might require a wrench to replace this part if it becomes broken. This is available as an individual replacement part and is made of a thin material.
Jenny Compressor Gauge-psi
PartSelect Number PS10374906
Manufacturer Part Number 142-1003
This genuine manufacturer sourced gauge is designed for use with Jenny air compressors. The gauge registers pressure readings and allows you to maintain needed pressure. It provides an identical replacement for a damaged or a missing component that was installed on a new unit. Note, this high-quality gauge is sold as an individual item. You would need a wrench to secure this gauge to the manifold. When replacing this item make sure to unplug the air compressor and bleed out air from the tank.
Jenny Compressor Bearing-rod
PartSelect Number PS10374912
Manufacturer Part Number 150-1011
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Jenny equipment. This is an identical replacement for a missing or damaged bearing-rod that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.
Jenny Compressor Aftercooler-hose
PartSelect Number PS10375139
Manufacturer Part Number 360-1392
Keep in mind that this part is made of metal and is sold individually. The aftercooler-hose attaches to the male connector. A set of pliers may be helpful when replacing this item. This part will need to be replaced if it breaks. It is an authentic OEM sourced item which is specially produced for use with Jenny compressors.
Jenny Compressor Appliance Types
Popular Jenny Compressor Models
Below are the most popular Jenny Compressor models we have. Enter your model number in the search box to find your model.
- F (Series) () One Cylinder Single Stage Stroke Pump
- T (Series) () wo Sage Sroke Pump
- G (Series) () Four Cylinder Sinle Stae Stroke Pump
- U (Series) () Two Stage Stroke Pmp
- W (Series) () Four Cylinder To Stage Stroke Pumps
- K (Series) () Two Cylinder Single Stage Stroe Pump
- KU (Series) () Two Cylinder Single Stage Stroke Pump
- JU (Series) () Four Cylinder Single Stage Stroke Pump
- WU (Series) () Four Cylinder Two Stage Stroke Pumps
- AM780 Electric Hand Carry Compressor Pump
- GU (Series) () Four Cylinder Single Stage Stroke Pump
- GC (Series) () Four Cylinder Single Stage Stroke Pump
- A2G246 Electric Hand Carry Compressor Pump
- GT (Series) () Four Cylinder Two Stage Stroke Pumps
- GC5A-60V Electric Vertical Single Stage Compressor
- F12C-30C Electric Single Stage Compressor
- K2A-60 Electric Single Stage Compressor
- K1A-30-SSC
- K15A-30P-SSC Wheeled Portable Electric Single Stage Compressor
- J5S-BS Single Stage Single Phase Compressor