Husqvarna Generator Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Husqvarna Generator Parts
Your Price
$58.31
On Order
Husqvarna Generator Fuel Gauge Cap
PartSelect Number PS9314364
Manufacturer Part Number B4363GS
This OEM replacement fuel gauge cap is designed for use in generators. It comes in a cylindrical shape and has a built-in window to easily view the fuel levels without pulling out the entire cap. It is approximately 5.25 inches in length, while the head has a diameter of 3 inches. The purpose of the cap is to cover and protect the fuel gauge, which indicates the levels of gas available in the tank. It prevents dirt and debris from entering the gauge area and prevents fuel from leaking out. A faulty cap will allow contaminants to enter the gauge, and cause fuel to leak, leading to inaccurate fuel readings and safety risks. Twist the cap to remove it and clean the surrounding area thoroughly. Place the new gauge cap in position and ensure that it is locked in place.
Your Price
$27.33
In Stock
Husqvarna Generator Fuel Valve With Bushing
PartSelect Number PS8911051
Manufacturer Part Number 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve and the rubber cap. Its primary purpose is to deliver fuel from the tank to the carburetor.
This part is found on the underside of the fuel tank and should be replaced when it is worn or damaged. When malfunctioning, it may cause your engine to be starved of fuel and run rough or not at all. You will need a screwdriver and pliers to complete this repair.
Customers rate this repair as Easy.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
James from PICAYUNE, MS
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Read more...
Your Price
$141.49
In Stock
Husqvarna Generator Voltage Regulator
PartSelect Number PS9270265
Manufacturer Part Number 205858GS
The OEM voltage regulator or voltage control is a part used to regulate the voltage so it can provide the right amount of power to electrical components. It attaches inside the alternator housing. The part is black and 2 x 3.5 inches. If damaged, the voltage will become too low/high and the part should be replaced. This part requires a voltmeter to use properly. Please refer to your make, model, and diagram to ensure this is the correct part.
Your Price
$6.40
In Stock
Your Price
$15.46
In Stock
Husqvarna Generator Breaker, Circuit, 20a
PartSelect Number PS9919917
Manufacturer Part Number 209872GS
This circuit breaker is an important safety device found in the control box of your generator. It protects the electrical system from overloads and short circuits by automatically cutting off the electricity flow when it detects excessive current. It can handle a maximum current of 20 amps. You can tell if a circuit breaker is broken by checking for visible signs of damage, such as an unresponsive button, cracks, or burnt marks. If the circuit breaker repeatedly trips, the breaker may be faulty or overloaded. You will need a screwdriver, a set of pliers, a socket set, and a nutdriver to replace the breaker in your generator. Follow the instructions in your user manual to access the control box. You typically need to remove the carburetor and the fuel tank before removing the cover of the control box. Please note that this OEM replacement part is sold individually.
Your Price
$32.55
On Order
Husqvarna Generator Assembly, Holder, Brush
PartSelect Number PS9063496
Manufacturer Part Number 66386GS
The brush holder assembly in your generator keeps the brushes in place, allowing them to touch the rotor. It consists of a plastic brush holder and two carbon brushes with lead wires and attached springs. You can usually find the holder assembly inside the generator housing, near the rotor and stator assembly. If the holder assembly is broken, it can cause improper electrical contact between the brushes and the rotor, leading to a loss of electrical current transfer. Additionally, over time, the brushes will wear down from use, resulting in inconsistent contact with the rotor. Look for visible signs of damage like cracks, breaks, or deformations in the holder. A damaged holder can cause unstable voltage, power surges, or your generator failing to generate electricity altogether. To remove the existing brush holder assembly from your generator, refer to your user guide for detailed instructions. It may involve removing a cover or access panel to reach it. Use a nut driver or suitable tool to disconnect the assembly from the rear-bearing carrier and any connected wires. Remember to magnetize the brush assembly and conduct a generator test after installing the new one. Please keep in mind that this authentic OEM part is sold individually.
Your Price
$10.39
In Stock
Husqvarna Generator 18oz 30w 4 Cycle Oil
PartSelect Number PS8817222
Manufacturer Part Number 100005
This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.
Your Price
$12.20
In Stock
Husqvarna Generator Gasket-exhaust
PartSelect Number PS9295033
Manufacturer Part Number 695398
This is a genuine replacement part sourced from the original manufacturer for use with small engines. The special gasket is commonly used to seal the connection between the exhaust manifold and the cylinder head. This special gasket is available as an individual replacement part, please see model diagram for associative parts.
Your Price
$15.64
On Order
Husqvarna Generator Fuel Tank Valve
PartSelect Number PS9939125
Manufacturer Part Number 310574GS
This is an authentic Briggs & Stratton replacement part that is intended to be used with portable generators. The valve is used to connect the fuel line to the tank and to control the flow of fuel from the tank. This item is available as an individual replacement part.
Your Price
$113.48
In Stock
Husqvarna Generator Wheel
PartSelect Number PS8914298
Manufacturer Part Number 209636GS
The authentic 10" Wheel Assembly (Wheel, 10" Diameter) is a 10-inch black, plastic-and-ubber wheel. It allows easy moving of the generator. Installation requires pliers and is rated as "Easy". If your tire is flat, then it should be replaced. Refer to your make, model and diagram to ensure this is the right part.
Husqvarna Generator Appliance Types
Related Husqvarna Generator Parts
- Husqvarna Generator Bearings
- Husqvarna Generator Caps and Lids
- Husqvarna Generator Exhausts
- Husqvarna Generator Spark Plugs
- Husqvarna Generator Wire Plugs and Connectors
Popular Husqvarna Generator Models
Below are the most popular Husqvarna Generator models we have. Enter your model number in the search box to find your model.
- 1365GN 1365 Gn (1935) (2004-06)
- 1365GN Husqvarna Generator Model 1365GN Parts
- 1365GN 1365 Gn (2006-04)
- 1365GN 1365 Gn (2003-07)
- PP4300 Poulan PP4300 Portable Generator
- PP6600 Poulan PP6600 Portable Generator
- G1300P G1300p
- PP3000 Poulan PP3000 Portable Generator
- 1935-0 1935-0 - 6,500 Watt Husqvarna
- G3200P G3200p
- 1935-1 1935-1 - 6,500 Watt Husqvarna
- PP7600E Poulan PP7600E Portable Generator
- G2500P G2500p
- 030330-0 030330-0 - 2,000 Watt Husqvarna
- G8500P G8500p, 967863501, 967863502, 967863503, 967863504, 967863505, 967863506, 967863507, 2018-10
- G1300P Generator
- PP6600E Poulan PP6600E Portable Generator
- 030369-0 030369-0 - 5,500 Watt Husqvarna