Husky Tiller Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Husky Tiller Parts
Your Price
$6.40
In Stock
Husky Tiller Nut-flglk 5/16-18
PartSelect Number PS9092936
Manufacturer Part Number 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location.
While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations.
Customers rate this repair as Easy.
Your Price
$6.40
In Stock
Husky Tiller Carriage Bolt 5/16-18 X 3/4" Lg.
PartSelect Number PS9298671
Manufacturer Part Number 710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.
Your Price
$25.55
Special Order
Husky Tiller Oil Seal
PartSelect Number PS16413297
Manufacturer Part Number 721-04232
This high-quality component is made for use with walk-behind rotor tillers. It is an authentic oil seal which is supplied by the original equipment manufacturer. This item helps to provide a tight seal for the ball bearing and the transmission shaft. Over time it may wear out and begin to crack eventually requiring a replacement to prevent oil leaks. For the exact location and the correct installation check the diagrams of your model. This high-quality oil seal is made of a durable rubber material with a metal casing and is sold as an individual component. You will need wrench set and a tool to pull off the old seal when performing this repair.
Your Price
$10.83
In Stock
Husky Tiller Fuel Bowl O-ring
PartSelect Number PS17016670
Manufacturer Part Number 951-11589A
This high-quality fuel bowl O-ring is a genuine replacement part supplied by the original equipment manufacturer for use with lawn and garden equipment. It is designed to create an airtight seal for the fuel bowl, helping to prevent leaks and maintain proper engine performance. Over time, the O-ring may shrink, crack, or degrade, requiring replacement to ensure continued reliability. Made from durable rubber, this part is sold individually and includes one O-ring per order.
Your Price
$6.57
In Stock
Husky Tiller Washer-lock 5/16
PartSelect Number PS9311087
Manufacturer Part Number 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent the nut from backing off and becoming loose on the pulley shaft, and is attached to the drive belt pulley assembly. You will know if you need this because your owners manual will specify it, or the model number of your machine will correspond with this part. If the part is broken due to fatigue, the shafts will free spin when they should be locked together, and must be replaced.
Your Price
$7.60
In Stock
Husky Tiller Pin:cotter
PartSelect Number PS9094228
Manufacturer Part Number 714-04043
This cotter pin, also known as a bow tie cotter pin, is a genuine OEM part that is designed for use with lawn and garden equipment. Made of metal and measuring 1.875-inches long, this pin snaps into place and fits within shafts measuring 0.3125-inches to 0.375-inches. This pin can fall out due to vibrations or by being knocked off, so check your user manual for exact replacement of this pin. This part is sold individually.
Your Price
$6.40
In Stock
Husky Tiller Bushing-.380 Id
PartSelect Number PS9167515
Manufacturer Part Number 941-0475
This is an authentic OEM part for Craftsman lawn and garden equipment. This bushing has an internal diameter of 0.380", is made of durable black plastic, is not part of an assembly or kit, and is sold individually. The purpose of this bushing is to ensure there is a tight fit between parts.
A common sign this part needs to be replaced is if you notice any parts loosely connected or detached. This part will become worn through regular use of the machine. It is located in various areas, depending on your model. Refer to your owner's manual for the exact location. You will need a wrench and pliers to complete this repair.
Customers rate this repair as Medium difficulty.
Your Price
$6.40
In Stock
Husky Tiller Hold Down-cable
PartSelect Number PS9167431
Manufacturer Part Number 946-0605
This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to secure the clutch control handle and cable together. This holder is made of durable plastic and can replace the old holder by simply removing it, inserting the cable into the new holder, and tightening it until it is locked in place.?
Your Price
$8.55
In Stock
Husky Tiller Spark Plug
PartSelect Number PS16466706
Manufacturer Part Number 951-10292A
This is a genuine manufacturer approved replacement spark plug. It is an authentic OEM part commonly used on a variety of lawn and garden equipment. The purpose of a spark plug is to deliver electricity from an ignition system to the combustion chamber. Over time spark plugs tend to wear out, get dirty or fouled requiring replacement. Includes one (1) spark plug per order. You would need a spark plug wrench or a socket wrench to install the spark plug. Please note, after replacing it, you should gap the spark plug according to the owners manual of the outdoor product you have.
Your Price
$8.66
In Stock
Husky Tiller Carburetor Gasket
PartSelect Number PS9171925
Manufacturer Part Number 951-11571
This is an authentic replacement part manufactured for use with outdoor power equipment. The carburetor gasket is used to form a seal between the carburetor and the air intake box. It is recommended to replace gaskets when servicing the carburetor to ensure good seals when the parts are reassembled. This gasket is sold as an individual replacement part.
Husky Tiller Appliance Types
Related Husky Tiller Parts
- Husky Tiller Bearings
- Husky Tiller Caps and Lids
- Husky Tiller Dipsticks
- Husky Tiller Oil Plugs
- Husky Tiller Seals and Gaskets
- Husky Tiller Shear Pins
- Husky Tiller Spark Plugs
- Husky Tiller Switches
Popular Husky Tiller Models
Below are the most popular Husky Tiller models we have. Enter your model number in the search box to find your model.
- 21AA40M1031 Tiller
- 21AA40M1031 Tiller
- 21AA45M5031 Tiller (2010) (Tractor Supply)
- 21AA412C731 Tiller
- 21AA404B031 Tiller
- 21A-240H031 Tiller
- 44-0361-6 Tiller (1992) (Tractor Supply)
- 21A-340-131 Tiller
- 21AB454E731 Tiller
- 44-0241-6 Tiller (1993) (Tractor Supply)
- 21A-240D731 Tiller
- 21A-240J231 Tiller
- 21A-240H031 Tiller
- 21A-22MK031 Tiller
- 21AB454E731 Tiller
- 21AB455C730 Tiller
- 44-0241-6 Tiller (1990) (Tractor Supply)
- 21A-340-131 Tiller
- 44-0361-6 Tiller (1993) (Tractor Supply)
- 21A-458B131 Tiller