EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

Husky Pressure Washer Parts

Popular Husky Pressure Washer Parts

Your Price
$6.40
   On Order
Husky Pressure Washer Detergent Suction Kit
★★★★★
★★★★★
1 Review
PartSelect Number PS9938134
Manufacturer Part Number 308452002
This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit will be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.
Fixes these symptoms
Installation Instructions
Duarte from GRISWOLD, CT
Must have froze over winter (stored in garage)
Repair was easy, however had to u tube issue for proper orientation of parts as it did not come with any instructions. Wished I had two as shipping was twice as much as part. Very satisfied. Read more...
Your Price
$6.40
   In Stock
Husky Pressure Washer Outlet Tube
PartSelect Number PS9938530
Manufacturer Part Number 308862003
This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wand, it is where the water exits from your machine so you can direct the stream towards a desired surface. You can tell if an outlet tube is broken when it has visible cracks or holes and when water leaks or sprays from the connection points or along the tube. A damaged or blocked tube can result in a loss of pressure and potentially premature wear or machine failure. To remove the outlet tube, use a wrench set to unscrew it from the pump. Please note that this replacement part is sold separately from the pump assembly.
Fixes these symptoms
Your Price
$37.67
   In Stock
Husky Pressure Washer Water Hose
PartSelect Number PS9938500
Manufacturer Part Number 308835006
(25 ft., 3000 psi) This water hose is for pressure washers. Water hose carries water from the pump to the spray wand. Wear work gloves to protect your hands when installing this part.
Your Price
$6.40
   In Stock
Husky Pressure Washer Chemical Siphon Tube
PartSelect Number PS9980319
Manufacturer Part Number 561399003
It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution from the tank to the pump. Over time the tube may develop cracks allowing for leaks, if this happens this part can easily be replaced. It is made of durable flexible rubber material and it is sold individually.
Your Price
$16.30
   In Stock
Husky Pressure Washer Inlet Tube
PartSelect Number PS9938526
Manufacturer Part Number 308861003
This is an authentic OEM part for pressure washers made by Homelite, Ryobi, and Husky. The inlet tube fits onto the pump and is made out of metal. When replacing this part a socket set may be needed. It is available as an individual replacement part, but also includes the metal bolt and the rubber o-ring.
Your Price
$7.58
   In Stock
Husky Pressure Washer 40 Degree Nozzle
PartSelect Number PS9938418
Manufacturer Part Number 308700012
This is an authentic OEM nozzle made to fit the Ridgid and Homelite pressure washers listed below. As a standard sized white nozzle, this part features a forty (40) degree spray width. It is least powerful of the quick connect tips. This nozzle is best suited for light duty washing on surfaces prone to scratching, breakage, and/or paint loss such as aluminum siding, stucco, or cars. This item is sold individually.
Your Price
$5.28
   In Stock
Husky Pressure Washer Axle (d133 X 95 Mm)
PartSelect Number PS9985801
Manufacturer Part Number 620599007
Your Price
$6.09
   Special Order
Husky Pressure Washer Rubber Foot
PartSelect Number PS9980329
Manufacturer Part Number 561454001
This replacement foot is an authentic OEM part made to fit the machines listed below. It is attached over the frame's metal feet with a bolt and, in some models, a washer (both sold separately; see manual for the specific part numbers needed for your machine). Use of these rubber foot covers helps with both sound reduction and stability. One (1) foot cover included with this purchase.
Your Price
$4.23
   In Stock
Husky Pressure Washer Lock Nut (m8 X 1-1/4 Mm)
PartSelect Number PS9996191
Manufacturer Part Number 678774002
This is an original part from Homelite. The lock nut (m8 x 1-1/4 mm) is compatible with many pressure washers, and is sold individually. The metal lock nut helps to secure various components of the pressure washer. A wrench, hex key and screwdriver are often needed for the installation.
Your Price
$2.99
   Special Order
Husky Pressure Washer Grommet
PartSelect Number PS12620259
Manufacturer Part Number 570554001
This authentic item is supplied directly from the original equipment manufacturer for use with pressure washers and generators. The wear pad is made of hard rubber and attaches to the foot bracket with a washer and a bolt. It may require a wrench during replacement if the part becomes broken. The pad is sold individually and helps to reduce vibrations and cushion the bracket.

Husky Pressure Washer Appliance Types

Related Husky Pressure Washer Parts

Popular Husky Pressure Washer Models

Below are the most popular Husky Pressure Washer models we have. Enter your model number in the search box to find your model.