Homelite Trimmer Hardware

Homelite Trimmer Spool Retainer (red-lh Thread) This is an OEM replacement part. It has a left hand threaded screw to remove and attach it to the trimmer head. Its purpose is to hold the spool with the cutting line, in the spool housing. It also acts as the bumper to advance the line from the spool. This is a well used and abused part of the trimmer. It may be a good idea to order an extra one.

Homelite Trimmer Screw This is a genuine replacement part manufactured for use with trimmers. The screw is commonly used to secure the handle. This screw is sold as an individual replacement part, please see model diagram for associative parts.

Homelite Trimmer Flanged Washer

★★★★★

★★★★★

1 Review

This flanged star washer is a manufacturer-sourced replacement part designed for use trimmers. It is also known as a tooth lock washer due to its serrated inner edge which resembles inward facing teeth. These teeth bite into the head of the fastener and provide a better grip than standard washers. This washer also has a flange on one side which is a lip that extends past the edge of the washer. It helps to distribute the load of the fastener over a wider area to provide extra stability and a more secure hold. Over time the washer may wear down or become damaged. To remove the washer, first unthread the bolt/screw it is fastened on. Use pliers to grip the washer and gently twist it off. Place the new washer over the fastener with the teeth facing toward the surface being fastened and insert it into the designated hole. Ensure that it is locked into place. Each washer is sold individually.

Homelite Trimmer Screw Authentic manufacturer approved replacement bolt made for use with string trimmers and chainsaws. This is a standard hardware with multiple uses based on your tool. Please refer to specific diagrams for correct application. This bolt has a hex socket head which requires a hex key/allen wrench for installation. It is sold individually.

Homelite Trimmer Screw (1/4-20 X 1-1/4 In.) It is a genuine item that is supplied directly from the original equipment manufacturer for use with Homelite and Ryobi handheld lawn and garden equipment. This is the special screw which is utilized to secure the gear head, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this durable metal hex head screw is sold individually, you will need a wrench to secure or remove it.

Homelite Trimmer Grommet This is a genuine OEM replacement part, sold individually. This Bumper helps keep the fuel tank in place, and minimizes vibration of the fuel tank. This part is used with a variety of string trimmers, compatible with the models listed below.

Homelite Trimmer Wing Nut This replacement wing screw is a genuine OEM sourced item, it is not an aftermarket imitation. It is specially designed for Homelite and Ryobi string trimmers and brush cutters. This hardware is generally used to secure the grass deflector. This screw is made from durable metal and it is sold individually.

Homelite Trimmer Lock Nut This is a Manufacturer Sourced replacement part for Lawn and Garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This Locking Nut secures the cutting blade on the Trimmers/Brushcutters. You would need a Wrench to tighten or loosen this Hex Nut.

Homelite Trimmer Cupped Washer The cupped washer attaches to the tri-arc blade with the use of the lock nut. This part is an OEM from Ryobi and Homelite to be used in brushcutters and trimmers. It is made of metal and helps to keep the cutting tool in place. A wrench will be needed if this part needs to be replaced. This washer is priced as an individual replacement part.

Homelite Trimmer Washer It is a genuine item that is supplied by the original manufacturer for use with Ryobi and Homelite handheld string trimmers. This washer-clutch is a special friction disk that helps to engage the clutch by ensuring a tight fit between connected components. It provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. Check the diagrams of your model for the exact location and the correct installation of this part. One durable metal washer is included. You may need a screwdriver and a wrench set to perform this repair.