Generator Hoses and Tubes

Generator Fuel Hose 4 Id X 8 Od 80mm This pipe-return is a genuine OEM sourced component. It is specially designed for use with Generac portable generators. This is the hose that the fuel travels through. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the tank through the return hose. Over time these rubber hose will become brittle and they may begin to crack eventually requiring replacements. Please note, one durable flexible fuel hose is included. Check the appropriate diagrams for your model to ensure the proper repair procedure.

Generator Line-fuel This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to transfer fuel from the fuel tank to the carburetor, and over time and due to exposure of gas, this fuel line can become brittle and crack, requiring a replacement. If you find your equipment is performing worse, check the fuel line for any visible signs of damage. To replace the fuel line, you will need to disconnect the spark plug and drain the fuel from your equipment, before simply removing the old line and installing the new one and reassembling the rest of the motor.

Generator Fuel Hose 4 Id X 8 Od 55mm This is a genuine OEM sourced replacement part which is specially designed for use with Generac portable generators. The purpose of this fuel line is to supply the fuel from the tank to the carburetor. By pressing on the primer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the return line. It is made of durable flexible rubber and it is sold individually.

Generator Fitting, Suction Pw It is a genuine part which is supplied by the original manufacturer for use with Generac power washers. The purpose of this fitting is to connect the suction fitting. This is an identical replacement for a faulty or a missing component that was installed on a new unit. Check the appropriate diagrams for your model to ensure the correct repair procedure. It is a durable component which is made of high-quality materials and is sold as an individual item.

Generator Hose 3/8 300deg 6 Long Oil

Generator Tube- Fuel This is an authentic Honda replacement part that has been sourced from the original manufacturer to be used with small engines. The fuel tube is part of the fuel system and is used to carry fuel from the pump. This item is available as an individual replacement part.

Generator Tube- Breather The breather tube fits between the air cleaner housing and the breather cover. It is an authentic OEM sourced item which is specially produced for use with Honda small engines. This part is available as an individual replacement. During the installation process, a socket set might be needed to replace this part. The tube is made out of rubber and will need to be replaced if it breaks.

Generator Tube- Fuel Tank This is a genuine part that is supplied directly from the original equipment manufacturer for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for the tube that delivers fuel from the fuel tank, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable rubber and is sold individually.

Generator Fuel Hose 4 Id X 8 Od 120mm

Generator Hose-vacuum This genuine part is sourced directly from the original equipment manufacturer. It is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this hose is to transfer vacuum from the engine. Unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. Note, this item includes one durable rubber hose and two metal clamps to secure it.