My Orders
General Electric Freezer Ice Makers
GET YOUR OFFICIAL General Electric PARTS TO ENSURE VICTORY
Popular General Electric Freezer Ice Makers
This 10 by 5 inch ice maker (Electromechanical Icemaker Kit, Ice Maker Assembly) produces ice. This particular model will produce seven crescent shaped cubes every cycle. It is constructed of plastic and metal, and comes in black/white. This kit includes a set of installation instructions, a 4-pin round plug-in connector, 6 post plug-in connectors, tube and fill cup. The ideal temperature of a freezer is zero degrees Fahrenheit. If the temperature in your freezer is at an appropriate level yet ice is still not being made, it could be an issue with the water inlet valve or your ice maker assembly. If you determine it is the ice maker, this is the replacement you need. The ice maker can break from normal wear and accidental damage. Ice makers will need to be replaced every 3-10 years depending on the frequency of usage and water quality. This model is mounted on the freezer wall.
This 10 by 5 inch ice maker (Electromechanical Icemaker Kit, Ice Maker Assembly) produces ice. This particular model will produce seven crescent shaped cubes every cycle. It is constructed of plastic and metal, and comes in black/white. This kit includes a set of installation instructions, a 4-pin round plug-in connector, 6 post plug-in connectors, tube and fill cup. The ideal temperature of a freezer is zero degrees Fahrenheit. If the temperature in your freezer is at an appropriate level yet ice is still not being made, it could be an issue with the water inlet valve or your ice maker assembly. If you determine it is the ice maker, this is the replacement you need. The ice maker can break from normal wear and accidental damage. Ice makers will need to be replaced every 3-10 years depending on the frequency of usage and water quality. This model is mounted on the freezer wall.
What this part fixes:
- Ice maker dispenses too little ice
- Ice maker dispenses too much ice
- Ice maker not making ice
Installation Instructions
Michael from Bradenton, FL
ice maker not working properly and door seal worn
Two screws held the icemaker on. You do not even have to take them all the way out to remove the IM. Replacement of the water valve was just as easy except they (parts manufacturer) updated the flange nut with a compression fitting and it took me a minute looking at it before I realize what was going on. The door seal could not be easi
... Read more
er, no tools just a few minutes of time
Read less
Upgrade your kitchen appliance with the GE Ice Maker Assembly Kit. This refrigerator icemaker kit is equipped with crucial components that include a fill cup, a 4-pin wire harness adapter, and a tube. If your icemaker is not functioning properly, ensure your freezer temperature is around zero degrees Fahrenheit. This ice maker kit involves an automatic process where it receives water from the water inlet valve and holds it in the ice mold until it freezes solid. If the ice cubes appear small, it might indicate the need for a new water filter. Remember to unplug the refrigerator and wear work gloves for safety while installing this part to continue enjoying fresh, ice-cold beverages at home.
Upgrade your kitchen appliance with the GE Ice Maker Assembly Kit. This refrigerator icemaker kit is equipped with crucial components that include a fill cup, a 4-pin wire harness adapter, and a tube. If your icemaker is not functioning properly, ensure your freezer temperature is around zero degrees Fahrenheit. This ice maker kit involves an automatic process where it receives water from the water inlet valve and holds it in the ice mold until it freezes solid. If the ice cubes appear small, it might indicate the need for a new water filter. Remember to unplug the refrigerator and wear work gloves for safety while installing this part to continue enjoying fresh, ice-cold beverages at home.
Installation Instructions
Lana from Fort Myers, FL
The fill cup kept breaking and we couldn't find the part. Did a google search and found Partselect.com who had it.
Slide it over the fill hose and just line it up and put it in the slot.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
