Dremel Multi-Tool Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Dremel Multi-Tool Parts
Your Price
$11.16
In Stock
Dremel Multi-Tool Carbon Brush Set
PartSelect Number PS17016959
Manufacturer Part Number 2610053746
This is a manufacturer-sourced replacement carbon brush set designed for use with Dremel high-performance rotary tools. The set includes two carbon brushes and two metal springs, essential components that help maintain optimal motor performance. Carbon brushes are wear items that naturally degrade over time due to friction, and replacing them is a common and necessary part of tool maintenance. This OEM-quality set ensures a precise fit and reliable operation. Installation is straightforward and requires only a hex key (Allen wrench). To replace the brushes, simply remove the screws holding the tool housing together, separate the two halves, and remove the brush covers. Then, take out the old brushes and springs, install the new brush assemblies, reassemble the housing, and test your tool. Regular replacement of worn brushes helps extend the life of your rotary tool and keeps it running smoothly.
Your Price
$11.16
In Stock
Dremel Multi-Tool Brush & Spring Set
PartSelect Number PS10259942
Manufacturer Part Number 2610005646
This is a genuine Dremel replacement part. Sold as a pair. Brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems. Used with the 4000 Variable-Speeds Rotary Tool shown below.
Your Price
$6.40
In Stock
Dremel Multi-Tool Lock
PartSelect Number PS10259958
Manufacturer Part Number 2610009839
This is a Genuine replacement part designed for Dremel Rotary Tool. It helps to lock the the Spindle Shaft. It is Made out of Metal and it is Sold Individually. This Assembly includes a Collar and a Pin. To complete the repair you would need a Hex Key/Allen Wrench.
Your Price
$6.40
In Stock
Dremel Multi-Tool Coupling
PartSelect Number PS10260349
Manufacturer Part Number 2615294309
This coupling is used on some of the Dremel and Craftsman Multi-Tools. It is used to connect the armature and drive shaft. It will also strip to safeguard the motor from burning up if the drive shaft becomes bound up. If the tool is not used for a long period of time it can become brittle and break. We do send out quite a few of these, it may be wise to order an extra one just to have one on hand.
Your Price
$11.16
In Stock
Dremel Multi-Tool Carbon Brush Set
PartSelect Number PS10259957
Manufacturer Part Number 2610009829
This is a genuine OEM replacement part, it is sold as a set (2)Two Brushes and two Brush Springs. Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$6.40
In Stock
Dremel Multi-Tool Collet Nut
PartSelect Number PS10260006
Manufacturer Part Number 2610014582
This is a genuine Dremel replacement part, it is sold individually. The purpose of the Collet Nut is to secure the collet with the bit of your choice in the shafts assembly of the Dremel tools shown below. By pressing on the lock assembly on the tool and using the wrench provided with your tool you can secure or release the Collet Nut.
Your Price
$29.36
In Stock
Dremel Multi-Tool Motor
PartSelect Number PS10259932
Manufacturer Part Number 2610005460
It is a genuine item that is supplied directly from the original equipment manufacturer for Dremel cordless rotary tools. This is an identical replacement for a faulty or damaged motor that drives the shaft, please make sure to refer to the appropriate diagrams of your model for the correct location and installation of this part. Keep in mind this high-quality metal body motor is sold individually. Note that this assembly includes one bearing that is already installed on the shaft.
Your Price
$12.82
In Stock
Dremel Multi-Tool Drive Shaft
PartSelect Number PS12094069
Manufacturer Part Number 2610914543
Genuine Dremel replacement part, this item is sold individually. This Flex Drive Shaft is used in the Dremel 225 Flex-Shaft Attachment. Over time the square ends of the Flex Shaft will become rounded and the unit will cease to operate correctly. This is a very popular part, it may be wise to have an extra one on hand. This is black in color.
Your Price
$6.40
In Stock
Dremel Multi-Tool Washer
PartSelect Number PS10260248
Manufacturer Part Number 2610945427
This is a genuine OEM sourced replacement part designed for use with Dremel oscillating tools. This steel washer helps to distribute the pressure evenly and allowing parts to be secured safely. It is helps to secure the blade to the tool. This part is made out of metal and it is sold individually.
Your Price
$16.99
In Stock
Dremel Multi-Tool Switch Assembly
PartSelect Number PS10259985
Manufacturer Part Number 2610013852
Genuine manufacturer sourced replacement switch used on Dremel rotary tool. It is an important part of the tool which handles on/off operations. Because switches have mechanical parts, they will tend to wear out over time, eventually requiring replacement. Switch has a plastic body and it is sold individually. To replace this switch you would need a Screwdriver. • Remove screws used to hold two pieces of housing set together • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing
Dremel Multi-Tool Appliance Types
Popular Dremel Multi-Tool Models
Below are the most popular Dremel Multi-Tool models we have. Enter your model number in the search box to find your model.
- 6800 Dremel Trio
- 300 (F013000) Corded Multi-Tool
- 4000 Variable-Speeds Rotary Tool
- 100 (F013001) Series Rotary Tool
- 800 Cordless Rotary Tool
- 400 XPR Variable Speed Rotary Tool
- 3000 VS Rotary Tool
- 8220 12V Max High-Performance Cordless Rotary Tool
- 395 (F013011) Corded Multi-Tool
- 395 (F013004) Corded Multi-Tool
- 395 (F013010) Corded Multi-Tool
- 395 (F0130CA) Corded Multi-Tool
- 395 Corded Multi-Tool
- 395 (F013012) Corded Multi-Tool
- 6300 Multipurpose Tool
- 6300 Multipurpose Tool
- 6300 Multi-Max Oscillating Tool
- 200 (F013001) Series Rotary Tool
- 1100 (F01347) Cordless Rotary Tool
- 750 (F013001) Cordless Multi-Tool