Cub Cadet Snow Blower Control Cables

Cub Cadet Snow Blower Auger Cable

★★★★★

★★★★★

2 Reviews

This is a genuine replacement clutch cable sourced from the original equipment manufacturer, designed for use with MTD and Yard Man snowblowers. It serves as an identical replacement for a missing or damaged cable originally installed on new units and plays a vital role in engaging the auger for proper snowblower operation. Made with high-quality rubber insulation, this durable component is sold individually. Please note that the housing, trigger, and hardware are not included and must be purchased separately. For proper installation, refer to your model’s diagram, and be prepared to use tools such as pliers and a wrench set.

Cub Cadet Snow Blower Drive Clutch Cable

Cub Cadet Snow Blower Cable-speed Select This speed selector cable is sourced from the original manufacturer and consists of a cable enclosed in an outer protective casing. It connects the control panel to the transmission/drive system of the snow blower, allowing you to adjust and select the speed at which the snow blower moves. When you adjust the speed on the control panel, the cable is activated, and it engages with the transmission to control the snowblower. The speed selector cable can fail over time due to various reasons including fraying from use and exposure to harsh conditions, corrosion, or inadequate lubrication, which causes it to become stiff. If the cable is faulty, your equipment will be unable to move, or stuck at one speed, and the control panel may be unresponsive. Disconnect the faulty cable and route the new cable through the same path. Connect the cable to the control panel and transmission, and secure it with the appropriate fasteners.

Cub Cadet Snow Blower Auger Clutch Cable

Cub Cadet Snow Blower Cable-clutch X 39.

★★★★★

★★★★★

1 Review

This is an authentic OEM sourced replacement part designed for use with snow throwers/blowers. It allows you to engage and disengage the unit. This cable is sold individually. You may need pliers to complete this repair. • Remove the cable end from the control head and install the new one • Now you can run the new cable down to the control handle • Attach the other end of the cable • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable

Cub Cadet Snow Blower Hold Down-cable

★★★★★

★★★★★

1 Review

This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to secure the clutch control handle and cable together. This holder is made of durable plastic and can replace the old holder by simply removing it, inserting the cable into the new holder, and tightening it until it is locked in place.?

Cub Cadet Snow Blower Guide-cable This is a genuine manufacturer-sourced part which is specially designed for use with Craftsman Snowblowers. The chute control cable guide attaches the chute control cables to the chute control lever and guides each cable as the lever is moved. This part is sold individually. Tools you will need for this repair are Pliers and an Adjustable Wrench.

Cub Cadet Snow Blower Guide-cable Chute

Cub Cadet Snow Blower Roller: Cable This is an authentic part that has been sourced from the original equipment manufacturer for be used with lawn and garden equipment. The part helps to support and guide the cable. It is an identical replacement for a missing or a damaged component that was installed on a new unit. Keep in mind this high-quality cable guide is sold as an individual item.

Cub Cadet Snow Blower Wheel Clutch Cable, 44.955-in. This is a genuine part which is supplied directly by the original equipment manufacturer and is used with Craftsman snowblowers. The drive cable assembly connects the handle drive control to the transmission which enables you to push the snowblower forward. This part is sold individually and is made of hard plastic and metal wire. You will need a screw driver and needle nose pliers to aid you in this repair. Let the engine cool before you begin installing.