My Orders
Craftsman Nailer Parts
GET YOUR OFFICIAL Craftsman PARTS TO ENSURE VICTORY
Popular Craftsman Nailer Parts
This head valve body regulates airflow within pneumatic nailers, helping generate the pressure needed to drive fasteners effectively. Built from durable materials, it supports consistent tool performance. Replacing a worn or faulty valve can resolve issues such as air leaks, reduced driving power, or failure to fire, restoring reliable operation.
This head valve body regulates airflow within pneumatic nailers, helping generate the pressure needed to drive fasteners effectively. Built from durable materials, it supports consistent tool performance. Replacing a worn or faulty valve can resolve issues such as air leaks, reduced driving power, or failure to fire, restoring reliable operation.
This is an authentic Bostitch replacement part used on specific Nailers. This is a Rubber Ring and it is sold individually. O-rings are designed to withstand thousands of pounds of pressure by creating a seal between two or more parts.
This is an authentic Bostitch replacement part used on specific Nailers. This is a Rubber Ring and it is sold individually. O-rings are designed to withstand thousands of pounds of pressure by creating a seal between two or more parts.
This is a Genuine OEM sourced replacement part designed for use with Staplers/Nailers. With this Exhaust Cover you can divert the air in any direction you want. It is made out of Plastic and it is Sold Individually. Please note Flange Nut used to secure the Cover is Sold Separately. To replace this item you would need a Hex Key/Allen Wrench.
This is a Genuine OEM sourced replacement part designed for use with Staplers/Nailers. With this Exhaust Cover you can divert the air in any direction you want. It is made out of Plastic and it is Sold Individually. Please note Flange Nut used to secure the Cover is Sold Separately. To replace this item you would need a Hex Key/Allen Wrench.
This is a Genuine Manufacturer Sourced replacement part designed for Nailers/Staplers. This O-Ring provides an Air-Tight Seal for the Valve Piston. Over time this O-Ring will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of Rubber and it is Sold Individually. Replacing this item you would need Hex Key/Allen Wrench and Pliers to replace this item.
This is a Genuine Manufacturer Sourced replacement part designed for Nailers/Staplers. This O-Ring provides an Air-Tight Seal for the Valve Piston. Over time this O-Ring will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of Rubber and it is Sold Individually. Replacing this item you would need Hex Key/Allen Wrench and Pliers to replace this item.
This special grommet is an original part which is specially designed for use with DeWALT and Porter Cable staplers and nailers. It is utilized to secure the pin that holds the adjuster. This is a high-quality replacement for a damaged or a missing grommet that was installed on a new unit. To ensure the correct location and application of this part, refer to the appropriate diagrams of your model. It is made of durable rubber and is sold individually. You may need pliers to remove and secure the grommet with the pin.
This special grommet is an original part which is specially designed for use with DeWALT and Porter Cable staplers and nailers. It is utilized to secure the pin that holds the adjuster. This is a high-quality replacement for a damaged or a missing grommet that was installed on a new unit. To ensure the correct location and application of this part, refer to the appropriate diagrams of your model. It is made of durable rubber and is sold individually. You may need pliers to remove and secure the grommet with the pin.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This is an authentic OEM product which is designed for Bostitch, DeWALT and Porter Cable nailers and staplers. It provides a tight seal for the valve piston. Over time the material may wear down causing air leaks. To replace this flat washer you will need a screwdriver and pliers. This item is sold individually and is made of durable material. Check the diagrams of your model for the proper installation.
This is an authentic OEM product which is designed for Bostitch, DeWALT and Porter Cable nailers and staplers. It provides a tight seal for the valve piston. Over time the material may wear down causing air leaks. To replace this flat washer you will need a screwdriver and pliers. This item is sold individually and is made of durable material. Check the diagrams of your model for the proper installation.
This is a genuine OEM sourced replacement part designed for nailers/staplers. This gasket provides an air-tight seal for the end cap. Over time this gasket will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of composite material and it is sold individually. Replacing this item you would need a hex key/allen wrench.
This is a genuine OEM sourced replacement part designed for nailers/staplers. This gasket provides an air-tight seal for the end cap. Over time this gasket will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of composite material and it is sold individually. Replacing this item you would need a hex key/allen wrench.
Keep your nailer or stapler feeding reliably with this magazine end cap, a durable component that secures the end of the magazine while helping to protect the internal pusher and spring assembly. It plays an important role in maintaining proper fastener alignment and helping prevent debris from entering the magazine, supporting smooth and consistent operation. A cracked or damaged end cap can lead to feeding issues and reduced performance, making replacement an effective repair. Installation typically involves removing the retaining pins, replacing the end cap, and reassembling the magazine. Refer to your tool's parts diagram or service manual to confirm the correct placement before installation.
Keep your nailer or stapler feeding reliably with this magazine end cap, a durable component that secures the end of the magazine while helping to protect the internal pusher and spring assembly. It plays an important role in maintaining proper fastener alignment and helping prevent debris from entering the magazine, supporting smooth and consistent operation. A cracked or damaged end cap can lead to feeding issues and reduced performance, making replacement an effective repair. Installation typically involves removing the retaining pins, replacing the end cap, and reassembling the magazine. Refer to your tool's parts diagram or service manual to confirm the correct placement before installation.
Installation Instructions
Matthew from Morton Grove, IL
Broken magazine end cap prevents magazine from latching closed
1. Use belt clip on staple gun to hold in place on workbench.
2. Use a hammer with a punch or small screwdriver to hit the two pins holding the end cap to the magazine. Repeat ad nauseum with as much force as you can muster until both pins come out and the broken end cap can be removed.
3. Align new end cap on magazine and use s ... Read more ame procedure to drive pins. Exercise caution with the shorter of the two pins. If not perfectly aligned, the plastic tabs on the end cap can easily break off.
2. Use a hammer with a punch or small screwdriver to hit the two pins holding the end cap to the magazine. Repeat ad nauseum with as much force as you can muster until both pins come out and the broken end cap can be removed.
3. Align new end cap on magazine and use s ... Read more ame procedure to drive pins. Exercise caution with the shorter of the two pins. If not perfectly aligned, the plastic tabs on the end cap can easily break off.
Read less
This genuine OEM bumper in your nailer absorbs the impact and provides cushioning when the piston retracts after driving a nail. It is seated at the bottom of the nail gun cylinder. Due to the repeated stress it undergoes during operation, the bumper wears out gradually. Signs that suggest the need for bumper replacement include unusual noises, reduced driving power, misfires, or visible damage to the bumper. To replace a worn-out bumper, remove the cap and detach the cylinder from the body. With the cylinder and piston removed, you can remove the old bumper. Install the new bumper by placing it in the bottom of the gun using pliers and seating it with the backside of a screwdriver. Reinstall the piston into the cylinder, ensuring it sticks out slightly. Insert this assembly back into the body, ensuring the ridges on the backside of the driver face towards the rear of the gun. Finally, reinstall the cap, place the seal onto it, align the gun body with the cap, and securely fasten it with the screws.
This genuine OEM bumper in your nailer absorbs the impact and provides cushioning when the piston retracts after driving a nail. It is seated at the bottom of the nail gun cylinder. Due to the repeated stress it undergoes during operation, the bumper wears out gradually. Signs that suggest the need for bumper replacement include unusual noises, reduced driving power, misfires, or visible damage to the bumper. To replace a worn-out bumper, remove the cap and detach the cylinder from the body. With the cylinder and piston removed, you can remove the old bumper. Install the new bumper by placing it in the bottom of the gun using pliers and seating it with the backside of a screwdriver. Reinstall the piston into the cylinder, ensuring it sticks out slightly. Insert this assembly back into the body, ensuring the ridges on the backside of the driver face towards the rear of the gun. Finally, reinstall the cap, place the seal onto it, align the gun body with the cap, and securely fasten it with the screws.
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers and staplers. The seal is used to prevent leaks between the head valve and the end cap spacer. This item is available as an individual replacement part.
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers and staplers. The seal is used to prevent leaks between the head valve and the end cap spacer. This item is available as an individual replacement part.