Bosch Multi-Tool Parts

This is a Genuine replacement part designed for Dremel Rotary Tool. It helps to lock the the Spindle Shaft. It is Made out of Metal and it is Sold Individually. This Assembly includes a Collar and a Pin. To complete the repair you would need a Hex Key/Allen Wrench.

This is a genuine Dremel replacement part, it is sold individually. The purpose of the Collet Nut is to secure the collet with the bit of your choice in the shafts assembly of the Dremel tools shown below. By pressing on the lock assembly on the tool and using the wrench provided with your tool you can secure or release the Collet Nut.

This coupling is used on some of the Dremel and Craftsman Multi-Tools. It is used to connect the armature and drive shaft. It will also strip to safeguard the motor from burning up if the drive shaft becomes bound up. If the tool is not used for a long period of time it can become brittle and break. We do send out quite a few of these, it may be wise to order an extra one just to have one on hand.

This is a genuine OEM sourced replacement part designed for use with Dremel oscillating tools. This steel washer helps to distribute the pressure evenly and allowing parts to be secured safely. It is helps to secure the blade to the tool. This part is made out of metal and it is sold individually.

This manufacturer-sourced replacement kit is designed for use with Dremel power tools and includes two (2) carbon brushes and two (2) brush holders, each equipped with metal springs and lead wires. Carbon brushes are essential components that conduct electrical current between stationary wires and the rotating motor. As wear items, they gradually degrade through use and friction, and will eventually require replacement to maintain tool performance. To complete this repair, you’ll need a hex key or Allen wrench. Begin by removing the screws that hold the tool’s housing together. Carefully separate the two halves of the housing to access the armature and brush holders. Remove the brush covers and take out the old brushes along with their springs. Install the new brush assemblies, reassemble the housing, and test your tool to ensure proper operation.

This is a Genuine Manufacturer Approved replacement part used on some Dremel Rotary Multi-Tools. This part provides the firm grip for holding a bit in a tool. This Collet is for using bits with 1/8" arbors. Due to prolonged, heavy use a collet may need to be replaced. Collet Nut is sold separately.

This item is an authentic Dremel replacement part that has been sourced from the original manufacturer to be used with saw-max tools. The metal flange plate fits between the spindle and the saw's blade and is used to provide spacing between the blade and spindle. This item is available as an individual replacement part.

This is a Genuine Manufacturer Approved Dewalt replacement switch used on Dremel Multi-Tools. This part controls on/off and variable speed functions. Over time and because of use a switch will deteriorate and eventually fail requiring a replacement.

This replacement power cord is supplied form original equipment manufacturer. It is specially made for Dremel rotary multi-tools. I plays a key role by delivering the electricity from the outlet to the tool. This cord is rubber insulated and it is sold individually. It does include a rubber grommet/sleeve. To complete this repair you would need a screwdriver. • Remove housing screws • Remove the housing • Disconnect wires from the old cord • Remove old cord • Secure the new power cord in place • Reattach wires • Reassemble and test the unit