Boring Machine Brushes

This carbon brush is an authentic DeWalt replacement part. It is sold individually, 2 are needed to make a set • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This carbon brush and spring assembly helps maintain proper electrical contact within the motor, allowing your power tool to run smoothly and reliably. Designed for consistent performance, it supports efficient power transfer to the motor components. Replacing worn brushes can resolve issues such as intermittent operation, excessive sparking, or failure to start, restoring normal tool function.

Genuine Porter Cable replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is a genuine OEM replacement part, it is sold individually. This part is used to keep the brush tight against the armature so the tool will work properly. Over time when the brushes wear down and heat is created, the spring may lose its tension and will have to be replaced.

This replacement carbon brush is an authentic item. It is specially manufactured for DeWalt drills. Carbon brushes are a commonly replaced part on power tools. Due to normal use and friction brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. This assembly includes one (1) carbon brush with a lead wire attached. Please note, the brush holder is sold separately. Replacing this carbon brush is a simple task that should only require a screwdriver. • Make sure the unit is unplugged • First remove housing screws • Remove the housing • Take out the old brush • Secure the new brush in place • Reassemble and test the tool

This is a genuine manufacturer sourced replacement brush holder is generally used with Dewalt as well as Black and Decker power tools. This item secures the carbon brush around the armature to provide stable physical contact. This holder is made out of plastic with metal and it is sold individually. Please note, carbon brushes are sold separately. To replace this assembly you would need a screwdriver. • First remove the housing screws • Remove the housing • Carefully remove the brush • Remove old brush holder • Secure the new holder in place • Reassemble and test the tool

It is an authentic item that is supplied by original equipment manufacturer for use with Dewalt, Porter Cable and Black and Decker power tools. This replacement spring helps to provide tension for the carbon brush pushing it against the armature. Over time the spring may lose its tension or even break eventually requiring replacement. It is made of durable metal and it is sold individually.