224009-1-S-GE-WB02X10733        -Charcoal Filter
224009-1-S-GE-WB02X10733        -Charcoal Filter 224009-2-S-GE-WB02X10733        -Charcoal Filter 224009-3-S-GE-WB02X10733        -Charcoal Filter

Charcoal Filter

PartSelect Number PS224009

NOTE: The charcoal filter cannot be cleaned. It must be replaced. This metallic vent hood filter collects grease particles in the air from cooking.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $41.02
  • You Save

    $6.84
  • Your Price

    $34.18
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 15 reviews What's this?
1-15 of 15
 

67 of 72 people found this instruction helpful

Parts Used

Level of DifficultyVery Difficult

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers

CustomerJoanne from Front Royal VA

Getting to the charcoal filter

Follow directions in the manuel, but getting the grill off to get to the where the filter goes was very difficult, the springs kept poping around. Finally got together. This is the 2nd time I have replaced this grill, don't remember it being this difficult before.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31 of 54 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerCarlos from Cape Coral FL

The microwave does not vent outside so it takes a chrcoal filter

Take 2 screws off on top of the microwave, remove the small grill, remove the old charcoal filter, replace it with the new one put the grill back on, that is it, very easy. I change the filter every 6 months.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 7 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSharon from Denham Springs LA

Needed replacing

very easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 8 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerNOSHIR from Sun City Center FL

Replace spent carbon filter

remove 2 screws from top of grille; remove grille by moving it to the left and then away.
remove old filter by lifting the front edge and then pull out, and replace it wih a new one using the reverse order of the above.
replace grrille and screws.
The repair is a 'no brainer'.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJeff from Denton TX

Plastic frame on grille assembly broken.

Removed 3 screws.
Removed grille assembly.
Installed new charcoal filter.
Installed new assembly.
Installed 3 screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLawrence from Cincinnati OH

Water dipenser valve leaking.

Replaced the filter cartridge.Problem solved.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerIsolde from RIverdale NY

Microwave message "time to replace filter"

It was very easy to remove the old charcoal filter and insert the new charcoal filter(had done it before with with the replacement filter GE had included with the purchase).

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyVery Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerNancy from Port Saint Lucie FL

No carbon filter in vent and fan

Had to pry the front top of mircowave open and bend down and force this carbon filter in on an angle .Had to call several numbers for instructions. Very awkward and ridiculous to put carbon filter in-besides, it should have come with one to start with!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJudy from Friendship MD

Needed to change filter

Remove two screws on the top of the grill. Slide the grill to the left and then pull straight off. Slide the filter in place. Replace grill and screws

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerKambiz from Mesa AZ

Charcoil filter needed to be changed.

GE microwave displayed the message that Charcoil Filter needs to be changed. I disconnected the unit and removed the top two screws then removed the top panel by sliding it gently to the left. Replaced the filter. And positioned it in the same way the old filter was installed. Replaced the top panel and screws, Connected the unit back and used the Menu option to reset the Charcoil Filter warning option.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerBonnie from Vandalia IL

Error message on readout said to change the filter

First I removed the two screws that held the filter cover in place, lifted out the old and replaced it with the new filter. Put the filter cover back on and replaced the two screws that hold it in place, and it was done in less than 5 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerClyde from Audubon PA

Replace charcoal filter

Followed the easy directions that came with the replacement filter

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPhyllis from Hamilton OH

Past time to replace

I unscrewed two screws on top of the microwave, slid the part (which opens when the microwave is in use) to the left and put it aside. The old filter is then easily picked up and removed. I placed the new filter in the same spot. I repositioned the removed part in place, lining up the little tabs, slid it to the right, which automatically lined up for replacement of the screws. These directions were included with the new filter and it was very easy to follow. I can't believe anyone would pay someone else to do this simple task! I am a 67 year old female.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Charcoal Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDon from Supply NC

New unit, had to use inside vent, filter not included

I went to your site and looked up the schematic parts list and determined how to remove the grill and install the filter. I had the grill off and when the filter arrived I put it in, replaced grill and screws and then in about 20 min had the microwave installed on the wall and operating. By the way the part arrived about three days earlier than estimated. Thanks for your prompt response. You are on my favorites list for future appliance parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAmitabh from Bartlett IL

Burnt out halogen bulbs and broken glass shield

I usually replace the charcoal filter in the Microwave one every 3 months. this light out looked confusing and complicated at first, however I was surprised how easy it was when you have proper tools and directions from fellow Do It Yourselfers.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 15