Models > DVM1850MM2BG

DVM1850MM2BG General Electric Microwave - Overview

Get Parts and Repair Help for DVM1850MM2BG

If you know the microwave repair part you need, you can browse the list of all parts on the DVM1850MM2BG, or you can search by name or part description. You can also find your part by where it is located on the DVM1850MM2BG by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for DVM1850MM2BG parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the DVM1850MM2BG [Viewing 1 of 1]

$5.43

Halogen Light Bulb - 120V 20W

Sold individually.

$5.84

Light Bulb - 40W 130V

Sold individually.

$11.54

Light Socket - 250V 75W

$19.43

Secondary Door Switch

$8.54

Glass Light Lens

$8.54

Glass Turntable Coupler

This part accepts a D-shaped motor shaft.

$36.67

Grease Filter

This metallic vent hood filter collects grease particles in the air from cooking. Sold individually.

$17.73

Monitor Door Switch

$80.49

Glass Cooking Tray

$4.27

Flat Cab Mounting Bolt

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lens cracked and bulbs burned out

  • Customer: Mark from GRAND BLANC MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 107 of 143 people found this instruction helpful
First I removed the single screw holding the lens assembly in place. Then I lowered the assembly and tilted it until it came out. To remove the existing cracked glass lens there were four tabs bent down on it. By hand I lifted each tab just enough to remove the broken lens. I then replaced the broken lens with the new one and re-bent the tabs down by han... read more

Light bulb out, tried to remove, lamp socket broke

  • Customer: Gene from Urbana IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 82 of 92 people found this instruction helpful
Above the stove mounted microwave. I dropped the lens cover from under the bulb and tried to remove the bulb. The bulb separated from the base. I tried to remove the base with a pliers and the lamp socket broke. I ordered the parts and dropped the bottom cover of the unit down (5 screws). Removed 1 screww from the lamp socket, unplugged the wires and took it... read more

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

  • Customer: Marla from Arlington TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 86 of 106 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more