Models > DVM1850MMBG01

DVM1850MMBG01 General Electric Microwave - Overview

Get Parts and Repair Help for DVM1850MMBG01

If you know the microwave repair part you need, you can browse the list of all parts on the DVM1850MMBG01, or you can search by name or part description. You can also find your part by where it is located on the DVM1850MMBG01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for DVM1850MMBG01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the DVM1850MMBG01 [Viewing 1 of 1]

$5.43

Halogen Light Bulb - 120V 20W

Sold individually.

$5.84

Light Bulb - 40W 130V

Sold individually.

$11.54

Light Socket - 250V 75W

$19.43

Secondary Door Switch

$39.45

Drive Motor

This motor rotates the glass turntable in the microwave and accepts a D-shaped shaft.

$8.54

Glass Light Lens

$8.54

Glass Turntable Coupler

This part accepts a D-shaped motor shaft.

$36.67

Grease Filter

This metallic vent hood filter collects grease particles in the air from cooking. Sold individually.

$17.73

Monitor Door Switch

$80.49

Glass Cooking Tray

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The turntable motor went out and was making a horrible sound when I started the microwave

  • Customer: Kim from Centerville GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 144 of 210 people found this instruction helpful
First I unplugged the microwave. :) Then, I removed the 6 screws found underneath the microwave, which allowed the bottom piece to hang down so I could see the turntable motor. I took the two screws out holding the motor in place and pulled the electric connectors off the motor terminals. Then I got the new part from PartSelect.com, replaced the electrical c... read more

Lens cracked and bulbs burned out

  • Customer: Mark from GRAND BLANC MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 107 of 143 people found this instruction helpful
First I removed the single screw holding the lens assembly in place. Then I lowered the assembly and tilted it until it came out. To remove the existing cracked glass lens there were four tabs bent down on it. By hand I lifted each tab just enough to remove the broken lens. I then replaced the broken lens with the new one and re-bent the tabs down by han... read more

Light bulb out, tried to remove, lamp socket broke

  • Customer: Gene from Urbana IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 83 of 93 people found this instruction helpful
Above the stove mounted microwave. I dropped the lens cover from under the bulb and tried to remove the bulb. The bulb separated from the base. I tried to remove the base with a pliers and the lamp socket broke. I ordered the parts and dropped the bottom cover of the unit down (5 screws). Removed 1 screww from the lamp socket, unplugged the wires and took it... read more