GHW9300PW4 Whirlpool Washer - Instructions

Read the instructions provided by PartSelect.....and with a bit of patience I installed all four bolts so the washer's inside agitator was not damaged in shipping. I highly recommend that anyone who is moving/storing or shipping their washer that you find the correct shipping bolts according to your model and make and install them prior to moving your appliance.

Simple reair .....Two Torx screws to remove on inside of handle also remove the rubber finger cushion from the old handle so you can install it on the new unit, this is not included. The whole repair souldnt take more than 5 - 10 minutes.

Took out screws and replaced it with the new handle.

Removed top cover. Manually opened door through top cover opening. Removed 3 screws at front holding assembly. Removed 3 harnesses attached to assembly. Replaced with new assembly and screwed back in. Replaced harnesses. Certainly an easy DIY job.

Searched YouTube and found a video of the bellows install. Viewed a couple of times and followed the instructions for a successful install in less than 1/2 hour.

i tore down the "tech use only" pamphlet from inside of the machine.i am an auto tech by the way. so i got into the onboard computer of my machine using this pamphlet.the machine's computer took over and went through a series of tests, which pointed me to the correct location of the problem.i acted on that info and replaced my water inlet valve. the actual code was " FH ".

It was easier than I thought it would be: 1. Order the parts 2. Upon arrival, went back to the website to get an idea as to how to install the parts. 3. Although a little apprehensive at first, the replacement and installation of the parts went flawless and was doing the laundry 15 min. Later. Done!

replaced in less than 5 minutes

I did not replace the pump body. I just removed the motor with the 3 screws. Put the new one on. This way I did not need to mess with the hose clamps.

Found it impossible to get the bellow off the machine. Removed the front spring. Even tried to but off the bellow. No luck. Called repairman. He had to take off the front panel, door panel, and the top of the machine before he could remove the back spring/clamps.

I watched video first and it help me a lot to do the repair myself of my washer machine and i save about $ 1,500 dollar. Thanks

I looked up the repair on YouTube. The exact repair was there. Remove the ring around the boot. Remove the part of the boot by the latch. Remove the latch. Replace the latch . Refit the boot. Replace the wire ring making sure the spring is down. Taadaa! The guy on the video took two minutes or so. It took me seven because I was very deliberate in my work, and it was the first time I had done this repair. The wife was very pleased!

My son pulled the washer out and found the parts that was leaking. He ordered the parts from your company. they arrived the next day and he re-pared the leaks and all is well.thank you

The product came on time and was perfectly rapped , it took me 15 mins to install after watching you tube videos on front loader washer . I was happy I didn't have to call a service man in . . . .

2nd screwdriver I tried worked fine. unscrewed the broke one and replaced the new one. very simple. We take good care of our house items and i,m so glad when you can get parts years later.