Quick Question!

Have you ever purchased from PartSelect.com before?

11745050-1-S-Whirlpool-WP8182862-Water Inlet Valve
11745050-1-S-Whirlpool-WP8182862-Water Inlet Valve 11745050-2-S-Whirlpool-WP8182862-Water Inlet Valve 11745050-3-S-Whirlpool-WP8182862-Water Inlet Valve http://www.partselect.com/Schematics/Maytag/YQTCDHMB.gif

Water Inlet Valve

PartSelect Number PS11745050

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not stop filling with water.
  • Leaking.
  • Will not fill with water.
  • No hot or cold water.

Compare At

$61.25

You Save

$10.21

Your Price

$51.04
Order within the next 40 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 4 reviews What's this?
1-4 of 4
 

57 of 62 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Jerry from Keenes, IL

Washing machine giving f20 error code

removed washer top, checked supply hoses and inlet valve to make sure not clogged, replaced valve and while already there replaced flowmeter, reinstall top and hoses and checked machine operation, machine working fine and wife thinks i am her hero

Help other customers find the most helpful instructions.

Were these instructions helpful?   

41 of 55 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: robert from Covina, CA

Water was slowly leaking into the washer drum

lickity split

Help other customers find the most helpful instructions.

Were these instructions helpful?   

28 of 36 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Pepin from Waltham, MA

Fh error code during wash

Ran diagnostics for this model (you can look for its service manual on the web which details how to do this). The diagnostics said the cold water inlet valve or the flow-meter were broken. To pin the issue down to one component, I switched the cold/hot water control cables going into the inlet valve assembly and switched the cold/hot water hoses. Ran diagnostics again and the cold water and flow meter passed but got a failure on the hot water inlet valve. This pointed to a bad cold-water inlet valve. I ordered a replacement at PartsSelect. Installation took less than ten minutes. Machine runs like a dream. Before all this I called a service center, and without even looking at the machine, they quoted no less than $300. But with a little reading and some sleuth work, I ended up paying only $70 for the part + S/H.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 15 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Nicholas from Boothwyn, PA

Error f28 in mid cycle

check error code : no water flow
pulled hoses [hot& cold] to clean screen in line.
pulled flow meter out from under top of hood to clean and check free wheel movement inside.
still error code F28 in mid wash cycle. called in and talk with service: he explained that hot& cold water valve was opening to slow or not enough for flow meter to read full presure. I replace water valve and flow meter. washer is doing fine. [I was getting readly to go in futher down the line and get new controler. talking to service stop me from spending a lot of money. THANK YOU

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4