CSX25GPCEAA Hotpoint Refrigerator - Instructions

Wathched the video and it was done in less than 15 min making ice again no problem

bought new left rail removed old one with a screw driver and replaced with the new one

I had a frig several years ago do the same thing -- freezer coils icing up and temperature warm. I had watched the repairman come in and take the back off the freezer and install some part, I knew not what. So I got on YouTube and four this website with instructions and directions of how the put the part in and which part it was. I am good at trouble shooting and was very comfortable after watching the video of what to order. I ordered the part. The instructions were clear. After the coils had thawed, it took less than 30 minutes to install the new part. I installed a Defrost Heater. My refrigerator has worked ever since. I am not a mechanic nor a fixer upper. I am a 60 year old female school teacher.

Determined with ohm meter that the defrost heater was defective (open). Thermostat also was defective per ohm/volt test. Replacement of the heater/thermostat assembly was very simple. Remove two screws and I think two 1/4" that secured the panel. Unplug the harness and I think four more screws securing the harness assembly. Remove harness and install the new harness. Route wiring as the old harness and secure with removed screws. Plug back in and reinstall panel. Work great once again.

I saved about $15.00 by ordering the part on line. It came in about a week and was a super easy process. Since it was just missing there really wasn't anything that needed fixing. just installed it where it belonged and all was good. Great and easy experience.

Removed the top hinge of the right-hand door, removed the door, replaced the cam riser on the bottom of the door, then replaced the door and top hinge. Simple and easy.

Went to GE website and researched the problem for the model, determined that it was 90% sure it was the Ice maker, I ordered it and it arrived the next day, installed it and it began working immediately,

just as written out with part

I watched the video and did the job as instructed. It was very easy and worked as expected. The video was the key.

I found the drawer slide rail for the left side and ordered it. It was delivered in a couple of days and it was fixed in 3 minutes. Partselect provided the best customer service we have ever received. Great Job! Thank you so much!

Removed ice select control unite from freezer by removing 3 nut screws holding unite in place. Disconnect 2 electrial plug ins.Remove unite from freezer and place on table for easy work space. Remove 4 nut screws holding Solenoid & Arm. Replace with new Solenoid & Arm. Reinstall back in freezer and now we have cube ice again.

I simple followed the video shown at part select web site. A piece of cake. accurate info. repair complete in 45 minutes. thank you part select

followed the previous posts, loosened four screws on the front panel, attached panel to new auger and ice bucket, and was good to go. Excellent advice!

Removed drawer cover, removed both drawers, unscrewed broken part, installed the new one, put drawers and cover back.

Repair was easy. All working now.