Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS306943
When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. Rail ONLY.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Unscrewed the old and screwed in the new. Parts were perfect and were original brand, no knock off stuff. Good deal...
Help other customers find the most helpful instructions.
Were these instructions helpful?
Remove the following: lower rails, evap cover, ice maker assembly, attaching hardware for light and evap fan. Follow directions for replacing defrost heater. cut and splice wires for new defrost thermostat, and temperature sensor using adhesive line shrink tube. reassemble. Work like new.
I removed the shelf, unscrewed the slide rails and replaced them with new ones. I replaced the shelf, put the food back in and I was done. Thanks, john bowers
Cleaned the refrigerator as the old parts were removed. Installed new parts as the old parts were removed so as to easily identify the replacement parts. Very easy and wife was extremely happy after old plastic parts self destructed over a period of months and refrigerator was essentially unusable on the bottom two drawers.
First I removed the vegetable drawer and glass shelf. I matched up the 'new' drawer slide rail next to the broken slide. I then used a phillips head screwdriver to remove the 2 screws that held the slide in place. After removing the broken slide rail, I installed the new rail, replaced the vegetable drawer and glass shelf. New item worked like a charm. The drawer slide arrived really quick after my order was placed. Approx. 2 days after ordering the part, it was on my front door step.
I started with removing all of the old parts.I compared all the new parts with the old.Everything matched up good.While I had it apart I cleaned all of the old parts to be used again.Everything went back together very well.I would have no problem ordering parts again,and doing a repaire.
my 15 year old son did the install in 30 minutesback in functional order and looks like satisfied customer!
First I removed the drawers and shelves. Then I removed the left and right trim pans (1 screw ea). Next I removed the two screws (8 total) for each of the left and right drawer slide rails and rail assemblies. Then I spent way too much time cleaning the bottom half of my refrigerator, the shelves and drawers! After finishing the cleaning, I installed the lower left and ride slide rails (2 screws ea). Then I installed the upper left and right slide rails (2 screws ea). I then installed the left and right trim pans (1 screw ea). After that I set the bottom shelf and drawer in and then did the upper shelf and drawer. The packaging was OEM, clearly marked too. The hardest part of the job was cleaning my refrigerator!
Removed(unscrewed) broken parts and replaced with new parts. I suggest parts be marked left or right
Very simple fix. Unscrewed broken drawer rails and replaced with the new. No big deal. But again, these seem very flimsy for this model of refrigerator. they should use metal drawer rails with rollers to better accomodate the wieght of produce in the drawers.
repair was simple removed glass shelf and removed the two screws holding rail in place. I was really amazed at the quick service that I had receiced, I ordered two of the same part and they had the instructions to send back the additional part in my email the next day. Thanks for your help.
I ordered the parts to repair my two drawers in the refridgerator. MY daughter climbed on them to reach the top shelf. While I was ordering the parts for the drawers, I thought I would find out if I could fix the ice and water dispenser. I looked up the model number and found the parts I thought would fix it...I read other customers repairs and figured it was the mother board. I ordered it on Thursday night, received it on Saturday and fixed it less than ten minutes. The video repairman was so helpful, I watched it a couple of times and felt confident to do the repair. My son was very proud of his mom...now we have ice, water and drawers that open and close......
Pretty much self explanatory.Removed drawer and anything on top of glass shelf.Remove two screws holding on slide.Replace with new slide.Repeat on other side.Replace shelf and drawer.
Removed goods in fridge, removed shelf, unscrewed 2 screws, installed new drawer slide with 2 screws, replaced shelf, inserted drawer. Most of the time was moving the stuff in the refregerator. If the fridge was empty it would have taken me 2 minutes.
I removed all 3 drawers and then removed the 2 screws holding the left side rail that had a broken retainer notch.Rescrewed new one in and re-installed the drawers. It was that easy.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.