| |
23 of 28 people found this instruction helpful
Parts Used
-
- Auger and Ice Bucket Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMichael from Antioch CA
The oiginal ice bucket auger became rusty and discoloered the ice.
I went on line to find the part. Luckily I found PartSelect.com. All I had to do was enter the model number into the search box and scroll through the list of parts.
I ordered the part over the weekend and recieved it on Tuesday!
All I had to do was remove 4 screws from the original Ice Bucket and attach the new one.
Perfect fit in under 15 minutes!
Awesome place to do business with! I hope I never have to do another repair, but if I do I will go to PartSelect first!
|
7 of 8 people found this instruction helpful
Parts Used
-
- Auger and Ice Bucket Assembly
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerWilliam from Chesapeake VA
Dirty ice from rusty auger
Removed old bucket/auger assy from frig. Removed 4 + screws from front cover. Put front cover on new bucket/auger assy. Reinstalled in frig.....done. now have clean ice.
|
6 of 6 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRoger from Norman OK
Ice bucket shelf broke at screw hole also at back . Metal attachment at back broke free from fan cover.
GE in my opinion made a poor design the ice shelf bracket attached to the metal fan cover after metal tab was bent down that is also where it broke it was riveted to this but the metal broke free
So i purchased a piece of aluminium flat strap cut this about 1" long then riveted this to the shelf bracket and pushed this through the metal fan cover and let rest there and put screw in at other end. Also purchased alum angle also to remake ice shelf when complete then i will use it as ice bucket shelf instead of plastic one.
|
5 of 7 people found this instruction helpful
Parts Used
-
- Auger and Ice Bucket Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerROY L from TIGRETT TN
Ice bucket was broken
it was really easy now it works like it did when it was brand new
|
4 of 6 people found this instruction helpful
Parts Used
-
- Auger and Ice Bucket Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerBarbara from Medical Lake WA
Ice maker would not dispense ice cubes
Removed the face plate (4 screws) on the ice bucket/auger and put it on the new unit.
|
3 of 3 people found this instruction helpful
Parts Used
-
- Auger and Ice Bucket Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerHenry from Rockville MD
I had a smell from the ice and bad taste
I removed the 4 screws from the cover and replaced the auger and ice bucket assembly. Extremely simple and I was amazed how easy it was.
|
4 of 8 people found this instruction helpful
Parts Used
-
- Auger and Ice Bucket Assembly
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerCharles from Odessa TX
Quit dispensing and crushing ice.
Ordered new auger and ice bucket assembly. Removed old door and with four screws I attached it to the new unit. Works very well!
|
3 of 6 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJane from San Dieg0 CA
Replacing filter and auger/ice bucket assembly
After I realized that I needed to take the front and door off the old ice bucket (which involved removing 4 screws) and mount it on the new part (putting in those 4 screws), the job was easy. Installing the new assembly requires shoving it into place without really being able to see how or where it attaches, so I wasn't sure it worked until it produced ice a few hours later, and it did.
The filter on the fridge was more than 10 years old, but the new GE Smart filter and its adapters screwed and snapped into place easily. Subsequent filter changes will be simple - just a snap!
|
2 of 3 people found this instruction helpful
Parts Used
-
- Auger and Ice Bucket Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerEleda from Humble TX
Refrigerator ice bucket was rusty
My husband just pulled out the defective ice bucket and replaced the new one.
|
1 of 2 people found this instruction helpful
Parts Used
-
- Auger and Ice Bucket Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerAngel from Chandler AZ
Ice was discolored due to rust on auger
Removed the old assembly from the refrigerator. Used a screwdriver to remove the four screws attaching the old assembly to the plastic front plates. Opened the box holding the new part (which had arrived very promptly at our doorstep), removed it and attached it very easily to the plastic front plates using the same four screws. Placed the new assembly in the refrigerator and started making new ice. It was EASY!! We had read what others had said about this repair and knew it would be something we could do. Your website is very user friendly and helpful.
|
1 of 2 people found this instruction helpful
Parts Used
-
- Auger and Ice Bucket Assembly
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerWalter from Wyndmoor PA
Ice maker crushed all ice and would not make cubes. Pushing the switch and changing to cubes did not work.
Removed old ice bucket with auger. Unscrewed front plates that form the front of the ice bucket. Replaced the front plates on the new part (ice bucket and auger). Replaced new assemblage. It took about 20 minutes. Had to empty ice out and put in a temporary cooler for storage. Bigger problem than the repair was diagnosing what was wrong. Pushed disagnose button and it said ice maker was working normallly. Careful examination of the ice bucket removed from refrigerator showed spring out of place on long metal rod that protrudes from the back of the ice bucket and fits into a square hole in back of refrigerator. Examined other end of rod that engages with plastic parts that run the ice auger and ice crusher mechanism. A piece must have broken off. That was the problem. Refrigerator ice maker now works fine as originally designed. Push crudh the ice crusher engages and you get crused ice. Push cubes and the icemaker crusher slides out of the way and you get cubes.
|
1 of 2 people found this instruction helpful
Parts Used
-
- Auger and Ice Bucket Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJudy from Naples FL
Ice bucket got a hole in it and auger would not work
Removed the 4 screws off the old bucket cover and place the cover on new bucket. Just that simply. Can't beat the price!!!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJOHN from CONROE TX
Rusted auger and broken ice bin door
After bagging the ice in the old bin and rinsing out the new bin, I removed 4 screws that held the old ice bin facing/door frame to the old ice bin and the facing came right off. Then I just screwed the facing on the new ice bin, popped the new door into place, and put the new ice bin back into the freezer. Although web descriptions for the parts I ordered referenced GE and other appliance brands and not Kenmore at all, the search engine led me to these parts and everything fit perfectly.
|
1 of 2 people found this instruction helpful
Parts Used
-
- Auger and Ice Bucket Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerbryan from miamif FL
Ice maker was rusty
i ordered this ice maker on sunday night and paid for the cheapest shipping. it got here monday morning and i couldnt believe it. super fast shipping!! works great
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerLARRY from McGregor TX
Ice bucket auger was rusting and getting the ice dirty.
Removed the old ice bucket from the freezer and placed the ice in a plastic bag to reuse. Removed the ice bucket front cover by removing six (6) screws. Installed the old front cover to the new ice bucket by using four (4) screws. Replaced the new ice bucket in the freezer and filled it with the ice. Also replaced the water filter. The ice bucket repair was very easy and fast. Filter replacement took more time since I had to go buy some new tubing.
|