Loss of display

ApplianceJenn-Air Range


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Hercules From Amagansett, NY

Apr 17, 2011

1 out of 2 people found this instruction helpful

Remove three screws for trim and three screws for display panel. Gently drop display on partially opened oven door for support. Remove two display component screws, two connectos and ribbon cable ( this requires squezzing the end tabs toward the center and gently pulling up to release the ribbon cable). Replace the display component... carefully align the ribbon cable by holes in cable and nibs in socket and press the socket release in as you squezze the end tabs. Check display and attach to stone. Add trim.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Clock Control Board

Part Number: PS2077361

Recycling Rebate Available
In Stock

Base Door Latch

Part Number: PS2077588

In Stock