Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SCE70600B

SCE70600B Jenn-Air Range - Overview

Get Parts and Repair Help for SCE70600B

If you know the range repair part you need, you can browse the list of all parts on the SCE70600B, or you can search by name or part description. You can also find your part by where it is located on the SCE70600B by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for SCE70600B parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 5 mins and your part ships today!
$29.46

Long Oven Sensor

This oven sensor kit comes with two harness adapters. This sensor detects the temperature within the oven cavity.

Order within the next 5 mins and your part ships today!
$84.13

Surface Element with Limiter - 6" - 1200W

Sold individually.

Order within the next 5 mins and your part ships today!
$22.22

2 Piece Broiler Pan

The top of this part is now black.

Order within the next 5 mins and your part ships today!
$69.92

Surface Element Kit with Limiter - 6"

This ceramic element kit comes with an overheat limit switch, two wires, and two wire connectors.

Order within the next 5 mins and your part ships today!
$44.36

Inner Oven Door Glass - Single Glass

The manufacture has substituted this part to a single piece of glass. Must use original window frame when replacing this part.

Order within the next 5 mins and your part ships today!
$18.69

Leveling Leg

This leveling leg is sold individually. It is all black in color and is made of a hard plastic. Four of these are required per range.

Order within the next 5 mins and your part ships today!
$106.21

Dual Radiant Burner Element with Limiter

Order within the next 5 mins and your part ships today!
$333.10

Electronic Control Board

This board comes with the metallic shield.

Order within the next 5 mins and your part ships today!

Door Lock Switch

This door lock switch is two inches long. It is a black and metallic switch that carries 120 volts.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Right rear burner went bad

  • Customer: Mark from Loxahatchee, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 105 of 113 people found this instruction helpful
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip char... read more

Oven not holding 350 F, when cooling the coils did not reheat

  • Customer: David from Westford, MA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 107 of 123 people found this instruction helpful
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. ... read more

Lost all clock and timer display

  • Customer: John from Kuna, ID
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 72 of 78 people found this instruction helpful
Removed the 4 phillip head screws that hold the trim plate on the bottom of the display panel (and you probably could skip this step).
Next, I removed the knobs from the front of the display panel.
Then I removed the 4 phillip head screws that were located (1 each) behind the knobs.
Finally, I removed the 4 hex head screws from the bottom of t... read more