frost formed around ice maker dispensser due to the flap not closing properly, the solenoid needed replacing

ApplianceGeneral Electric Ice Maker

ModelPSC23MGMBWW

Level of DifficultyEasy

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Screw drivers

Julia From Clearwater Beach, FL

Feb 17, 2011

1 out of 2 people found this instruction helpful

no instructions came with the part so I wrote for help from your techs. They were able to tell me how to access the solenoid. From there I was able to figure the rest out. I had to remove the trim, electrical board, flap, springs and arm to reach the screws necessary to remove the solenoid. I removed some of the corrosion with a baking soda paste so I could remove the screws. I carefully noted each step and position of the parts I removed and reversed the process to put things back after replacing the solenoid.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dispenser Door Solenoid Assembly

Part Number: PS1483583

$31.30
In Stock