Plastic Drive Cup split

ApplianceGeneral Electric Ice Maker

Model

Level of DifficultyDifficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

Leroy From Cary, NC

Aug 17, 2010

26 out of 29 people found this instruction helpful

I took the four screws out of the ice basket and removed the plastic cup pieces. I then lifted the scress shaft up and put the new cup in. You have pull up very hard on the screw shaft and use two thin flat metal puddy knives to disingage the two plactic stays on each side of the shaft holder. The plactic housing around the screw shaft did not brake, however. I then put the screw shaft and the cup drive in place quite easily. Works fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Dispensing Drive Cup

Part Number: PS964134

$27.55
In Stock