10 of 19 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:30 - 60 mins
CustomerSteven from Eau Claire WI
Broken bunner control and knob.
1. Slide out stove & unplug. 2. Remove stove top light top plate (a snap fit - do with care - a little awkward). 3. Remove bulb. 4. Remove two silver head Phillips screws that were under bulb. 5. Control panel swings face down towards stove top. 6. Pull off switch knob (spring pressure clip holds knob on switch shaft) and remove two silver head Phillips screws to release the old switch. 7. Follow instruction sheet that comes with the infinite switch to transfer wire connections to new switch. 8. Reassemble everything in reverse order. 9. Clean up before pushing stove back in.