Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KECC502GBL4

KECC502GBL4 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC502GBL4

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC502GBL4, or you can search by name or part description. You can also find your part by where it is located on the KECC502GBL4 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC502GBL4

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.81

CLEANER

This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and ...

$13.31

Surface Burner Knob

This knob allows you to turn the burner on your range or cooktop on, and it allows you to control the temperature of the burner. If your knob is broken, damaged, or lost, this is the replacement part you will need. This knob accepts a d-shaped shaft. To successfully install this part, line the flat edge of the shaft on the switch up with the hole in the knob, then simply press the knob onto the shaft and into place. This part is sold individually, and is made of black plastic. This part is approximately 2 inches in diameter.

$16.53

Burner Knob

Sold individually. This knob accepts a double-flat shaft.

$85.88

Radiant Surface Element with Limiter - 1200W

This is a radiant surface element with limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stove top.This model is sold individually and is 1200 watts. The main reason for needing to replace this part is if your element will not heat. Before ordering, make sure to test your stove top radiant element for continuity to make sure it is the problem. To make this installation you will need a Phillips screwdriver, and a 14-inch nut driver.

$48.30

6" Surface Element Infinite Switch

This switch controls the stove top surface burner.

$58.08

Dual Burner Control Switch

This switch controls the stove top surface burner.

$9.06

Burner Knob

Sold individually. This bisque knob accepts a double-flat shaft.

$27.67

Cooktop Mounting Bracket & Screw

$391.76

Maintop Glass - Black

$3.77

BRACKET, BURNER

Sold individually.

Common Symptoms of the KECC502GBL4

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Radiant element, 2400 watt, under Ceran glass cok top needed replacement.

  • Customer: GEORGE from NEWNAN, GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 133 of 205 people found this instruction helpful
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done read more

Hot Burner Light always on

  • Customer: Gregory from Cary, NC
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 93 of 129 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

Bad Element

  • Customer: Michael from Howell, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 57 of 100 people found this instruction helpful
Bought new element and installed. Very simple. Used phillips
screw driver. read more