Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KECC056RBL04

KECC056RBL04 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC056RBL04

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC056RBL04, or you can search by name or part description. You can also find your part by where it is located on the KECC056RBL04 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC056RBL04

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.24

SCREW

Sold individually.

Order within the next 5 hrs and your part ships today!
$13.31

Surface Burner Knob

This knob allows you to turn the burner on your range or cooktop on, and it allows you to control the temperature of the burner. If your knob is broken, damaged, or lost, this is the replacement part you will need. This knob accepts a d-shaped shaft. To successfully install this part, line the flat edge of the shaft on the switch up with the hole in the knob, then simply press the knob onto the shaft and into place. This part is sold individually, and is made of black plastic. This part is approximately 2 inches in diameter.

Order within the next 5 hrs and your part ships today!
$16.53

Burner Knob

Sold individually. This knob accepts a double-flat shaft.

Order within the next 5 hrs and your part ships today!
$85.88

Radiant Surface Element with Limiter - 1200W

This is a radiant surface element with limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stove top.This model is sold individually and is 1200 watts. The main reason for needing to replace this part is if your element will not heat. Before ordering, make sure to test your stove top radiant element for continuity to make sure it is the problem. To make this installation you will need a Phillips screwdriver, and a 14-inch nut driver.

Order within the next 5 hrs and your part ships today!
$48.30

6" Surface Element Infinite Switch

This switch controls the stove top surface burner.

Order within the next 5 hrs and your part ships today!
$9.06

Burner Knob

Sold individually. This bisque knob accepts a double-flat shaft.

Order within the next 5 hrs and your part ships today!
$361.61

Glass Cooktop - Black

$28.61

Cooktop Mounting Bracket & Screw

Order within the next 5 hrs and your part ships today!
$53.41

Surface Element Switch - 1800W

This switch controls the stove top surface burner.

Order within the next 5 hrs and your part ships today!
$6.28

Screw

Sold individually.

Order within the next 5 hrs and your part ships today!

Common Symptoms of the KECC056RBL04

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Hot Burner Light always on

  • Customer: Gregory from Cary, NC
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 91 of 127 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

No heat on burner

  • Customer: paul from trumbull, CT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 30 of 42 people found this instruction helpful
Turned off electricity! Pulled stove out -lifted up glass top(carefully) simply removed burned out coil and replaced it with new one. read more

Defective Surface Burner Element - 1800W

  • Customer: Robert from Daytona Beach, FL
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 20 of 32 people found this instruction helpful
First discount Ac from wall, then take out 2 screws on the front of the range top and lift up the top of the range surface, then while holding up the surface top take out the front burner and replaced new burner element.Let the surface top down and screw in the two screws. the surface top of the range is hinged so it would be good to have someone to hold th... read more