Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KECC502GWH3

KECC502GWH3 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC502GWH3

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC502GWH3, or you can search by name or part description. You can also find your part by where it is located on the KECC502GWH3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for KECC502GWH3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC502GWH3

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$48.41

Surface Element Switch Kit

This switch controls the stove top surface burner.

$359.36

Maintop Glass - Black

$32.22

LIGHT-IND

$6.05

SEAL-SWTCH

$4.79

SEAL-SWTCH

Switch Seal

SPRING

$29.72

GASKT-CKTP

$112.32

WIRE

$43.08

HARDWARE

Common Symptoms of the KECC502GWH3

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Radiant element, 2400 watt, under Ceran glass cok top needed replacement.

  • Customer: GEORGE from NEWNAN, GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 110 of 181 people found this instruction helpful
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done read more

Hot Burner Light always on

  • Customer: Gregory from Cary, NC
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 71 of 103 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

Bad Element

  • Customer: Michael from Howell, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 52 of 95 people found this instruction helpful
Bought new element and installed. Very simple. Used phillips
screw driver. read more